View Poll Results: Should we relabel this thread ***Official What did you do to your EG/EK today***?

Voters
260. You may not vote on this poll
  • Yes

    116 44.62%
  • No

    144 55.38%
Page 78 of 419 FirstFirst ... 28687576777879808188128178 ... LastLast
Results 925 to 936 of 5018
  1. #925
    Member Array
    Join Date
    Mar 2010
    Location
    Adelaide, Australia
    Car:
    '01 WRX
    put my wing back on and wired it up and the centre back light so they both work before it was one or the other... uhhh only took me 3 hours lol...
    OVERRATED TO BE UNDERRATED

    LOLNOPE!

  2. #926
    Newcomer Array
    Join Date
    Nov 2010
    Location
    Brisbane
    Car:
    EK Civic Sedan
    Quote Originally Posted by Raztaz View Post
    Attachment 17445

    This. 2 more doors to go

    And then scraped one of my rear wheels..godamit
    ^^^ Thats one of the things on my to do list!
    95' EK1 Civic Sedan
    Ridin' as low as I can go

  3. #927
    Member Array
    Join Date
    Jul 2010
    Location
    Brisbane, QLD
    Car:
    EJ8 VTi Coupe
    well not so much today or tomorrow, but Tuesday i'm respraying my stockies and getting rubber on them, and more than likely going to get a new bonnet... yay!
    57U-00


    Silver EJ8 Civic VTi Coupe - Still low - still slow!

  4. #928
    Member Array
    Join Date
    Mar 2007
    Location
    www.letusdrive.com.au
    Car:
    D15B7 YOOOOOO!
    dont know about qld but in nsw you can get a quote from mechanical workshop on your current state of suspension steering mechanical etc,,, get a mechanical report prooving the damages were caused by the pot hole send quote through council and they will send you a cheque within 3 weeks


    Quote Originally Posted by 57U-00 View Post
    hope this won't get moved, but I drove over a shit-ass pot hole and ended up with 2 bent rims... so I need to get a hold of a decent set of 16" rims, or a set of stock 175/65R14's so I can at least drive it in the mean time... the rim's not too bad but the structural integrity of the tyre wall for those two wheels has been compromised so if I do any sort of great distance, at any sort of highway speed it'll bubble and shear off... sad face

    oh, and my car is written off YAY!!!! well repairable write off, thanks to some faggotty hail from 4 weeks ago... JDM sticker front RH quarter panel and roof here I come... and matt black spoon look alike bonnet lol... just have one other big dent but will either put a pedo bear sticker over that or have a crack at popping it out when I buy new tail lights...

    PS if anyone has any stock rims or decent 16x7 4x100 mags they might like to sell or donate my way, PM me lol...
    Check out my build thread EGB16T. http://www.ozhonda.com/forum/showthr...build../page14
    Check out my for sale thread constantly updated with b series/ eg parts!

    Wakefield Honda Nationals First Timer : na-118 EG b16 1:16.4900

  5. #929
    Member Array
    Join Date
    Mar 2010
    Location
    Adelaide, Australia
    Car:
    '01 WRX
    washed it, now its all sparkling and clean
    OVERRATED TO BE UNDERRATED

    LOLNOPE!

  6. #930
    Member Array
    Join Date
    Feb 2009
    Location
    sydney
    Car:
    ek1
    received ek4 bb & bmc
    spoon socks
    25 washer clips!!

  7. #931
    Member Array
    Join Date
    Jul 2010
    Location
    Brisbane, QLD
    Car:
    EJ8 VTi Coupe
    Was told that up here also... I'm taking it to the tyre shop in the morning to have stock rims and tyres put on... I might ask them about that and ring the brisbane city council later on...

    i fast-tracked spraying my rims to tonight (because i'm impatient) and they look pretty good... gonna do the hub caps in matte black as well and colour the Honda "H" in with the red touch up paint pen... i know it sounds dodgy as fark... but hey i don't really care... cheap tyres... lol... once I've done everything else I'll invest in a good set of rims...

    also tomorrow i'm getting a couple of mates together and going to HondaRec at Nerang to get a new bonnet, also in matte black... pimpin' it ghetto style mofo... lol



    Quote Originally Posted by na-118 View Post
    dont know about qld but in nsw you can get a quote from mechanical workshop on your current state of suspension steering mechanical etc,,, get a mechanical report prooving the damages were caused by the pot hole send quote through council and they will send you a cheque within 3 weeks
    57U-00


    Silver EJ8 Civic VTi Coupe - Still low - still slow!

  8. #932
    Member Array
    Join Date
    Sep 2007
    Location
    CQ
    Car:
    Civic
    wheel bearings, cleaned wheels, sussing out brands of coilovers
    WTB: EK oem JDM Visors

    I love J-Cups

  9. #933
    Member Array
    Join Date
    Mar 2009
    Location
    Wollongong
    Car:
    Civic EK Si '98
    Quote Originally Posted by 57U-00 View Post
    Was told that up here also... I'm taking it to the tyre shop in the morning to have stock rims and tyres put on... I might ask them about that and ring the brisbane city council later on...

    i fast-tracked spraying my rims to tonight (because i'm impatient) and they look pretty good... gonna do the hub caps in matte black as well and colour the Honda "H" in with the red touch up paint pen... i know it sounds dodgy as fark... but hey i don't really care... cheap tyres... lol... once I've done everything else I'll invest in a good set of rims...

    also tomorrow i'm getting a couple of mates together and going to HondaRec at Nerang to get a new bonnet, also in matte black... pimpin' it ghetto style mofo... lol
    haha, i like it. Good to hear you got some rubber - go the diy hubbies!
    HONDAOEMMUGEN

    JDM/Mugen inspired EK sedan build thread: http://www.ozhonda.com/forum/showthr...ss-pics/page34

  10. #934
    Member Array
    Join Date
    Mar 2009
    Location
    Wollongong
    Car:
    Civic EK Si '98
    Quote Originally Posted by Raztaz View Post
    Attachment 17445

    This. 2 more doors to go

    And then scraped one of my rear wheels..godamit
    lol, man you must have been so careful not to get overspray everywhere - how did they lose colour, just age/sun?
    HONDAOEMMUGEN

    JDM/Mugen inspired EK sedan build thread: http://www.ozhonda.com/forum/showthr...ss-pics/page34

  11. #935
    Newcomer Array
    Join Date
    Nov 2010
    Location
    Brisbane
    Car:
    EK Civic Sedan
    Quote Originally Posted by Alvis View Post
    lol, man you must have been so careful not to get overspray everywhere - how did they lose colour, just age/sun?
    Mine have lost colour through cracking/ageing in the sun over 15 years.

    LOL that you were doing something that had nothing to do with your wheels yet you damaged a wheel. I feel your pain dude, its a horrible feeling when you damage a previously pristine wheel.
    95' EK1 Civic Sedan
    Ridin' as low as I can go

  12. #936
    Member Array
    Join Date
    Feb 2010
    Location
    Sydney's WEST
    Car:
    NHB DC2R + EURO
    Installed spoon mirrors, fitted axis og banzai wheels, rolled my guards and made my simota air intake legal with a full enclosed box! Wow what a day ./ to pellit for the installs

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.