B16A - OBD0
I change the spark leads to NGK the car wouldn’t start =/
It cranks but immediately its switch off as if there is no spark
then taught there might be a wire loose or wrong firing order..
so i double check and make sure everything was fine
Try back to start the car! yes it went alive and idles just fine.
i left it idle for 5 min then i take it out for a spin..
less then 2 min driving down the road near my house.
car decided to die.. all the sudden. AS if there is an ignition cut
All lights turn off, even i cant signal
radio off too.
As i prepare for this, i brought my stock leads with me
change them back to stock on the side of the road.
immediately the car is back on.
everything was normal.
So then i just put the Standard one back in because i taught there is something wrong with the NGK Blue
Then I took it to work this morning and all went smooth sailing until mid way to work it died. like previously
WTF? so i pulled over. wait until the car is stop
turn it back on (no check light) it starts again. and it get me to work.
Changing leads shouldn do anything as that leads is new.
my guess is the dizzy playing up.. but im not so sure yet
Do you guys have Any idea whats the problem is?
Cheers,
C
Reply With Quote
Bookmarks