[CL9] Low offset wheels

[elitee]

pics ;}

[racerwannabe]

Rims and coils arrived today.

Ended up going for BBS RS in 17X9 +20 all round and BC N+

Just wondering if anyone can recommend a place in SYD to get my guard work done

Try Sydney Guard Rolling. I paid 120 for both the fronts last year. Alternatively, you could try Top One in Arncliffe.
Nice choice of wheels. Ive not seen an euro with these wheels before. looking foward to pics with them fitted.
Are you refurbing them first?

[elitee]

Try Sydney Guard Rolling. I paid 120 for both the fronts last year. Alternatively, you could try Top One in Arncliffe.
Nice choice of wheels. Ive not seen an euro with these wheels before. looking foward to pics with them fitted.
Are you refurbing them first?

Cheers will check them out.

Yeah going to get them refurbished

[felixd]

Very noice !!!

[Bun]

Hi guys sorry to bring up a old thread but I am about to buy some Work Emotion Xd9's and was wondering about size. I was looking at getting 18x9 all around with +30 offset in matte black. Would 18x9 all round be a bit to much? I would like a aggressive look but also dont want the car to drive like crap.

cheers

Bunthoeun

[elitee]

How low do you plan on going ?

[Bun]

Im currently running Buddy Club Coilovers with about a 2 finger gap up front and no gap at the rear on stock 16's. Also got ingalls camber arms in the rear.

So i would like to run a finger gap between the wheel and wheel arch.

[x10Hz]

pics ;}

good man! i just bought myself a set of RS's also in 17" just waiting for em to come over from japan

Im currently running Buddy Club Coilovers with about a 2 finger gap up front and no gap at the rear on stock 16's. Also got ingalls camber arms in the rear.

So i would like to run a finger gap between the wheel and wheel arch.

you should really just read the rest of this thread, which you obviuosly havnt done... all the questions you are asking are already covered in here.

PS. if the guy above you is gonna run 17x9 +20 you can run 18x9 +30.
PPS. what makes you think your car will ride like crap on agressive wheels?

[Bun]

[/QUOTE]
you should really just read the rest of this thread, which you obviuosly havnt done... all the questions you are asking are already covered in here.

PS. if the guy above you is gonna run 17x9 +20 you can run 18x9 +30.
PPS. what makes you think your car will ride like crap on agressive wheels?[/QUOTE]


sorry should off read the whole thread first. I have read somewhere on another forum that a guy running 18x9.5 all around on a integra said his ride was crap with the aggresive stance.

[elitee]

good man! i just bought myself a set of RS's also in 17" just waiting for em to come over from japan

what offset did you end up getting ?

i need to get 2 center caps didn't know they were so expensive :@

iv also decided to spray the centers takata green with polished lip

[BLKWLF]

Hi guys. Im looking at getting 18x8 for the front and 18x8.5 for the rear. I wanna run 225/45 tires for the front and 235/45 for rear. What i need to know is what offset should i look for so i dont have any clearance or rubbing issues? Currently its stock height but will lower (not a lot) in the future.

[dee-y]

iv also decided to spray the centers takata green with polished lip

Nice! Would like to see pics when they're ready.

I'm thinking I should of gone for a more aggressive offset than 8" +38, but think it will look fine when I get my sussy sorted.