I had this problem when my d/s window popped out of the track. i undid my door trim and put the window back on track. when doing so, i didnt tighten it enough and when i put the trim back on, it started ratterling, which was odd cause it wasnt ratterling from before.
So i pulled off the door trim AGAIN and pushed the track in to hug the window a bit better and tightened the bolt. Worked a treat. No more ratterling.
Try that procedure and see how it goes. Good luck pal.
fixed.. xD tood the door trim off to check behind expecting some bullshit that would be hard to fix and it was just one of the rubber pieces that the glass ran down had become lose and fallen to the bottom of the door trim...... picked it up applied a suitable glue that bonds to both metals and rubbers applied generously and slid it up the track.... has been perfect ever since...
It's a common problem with the Integra's either they stick on the way down or they rattle around. What type of glue did you use as mine keep sliding loose on me no matter how many times i fix it?
i used some extra strength liquid nails.....make sure that what ever glue you decide to use can bond to both metal and the rubber....... and doesnt corrode the rubber... and apply generously..... coz your not going to see it after and you want it to stick well..( i still made sure it was a clean job though.. )
Bookmarks