Page 2 of 2 FirstFirst 12
Results 13 to 19 of 19
  1. #13
    Member Array
    Join Date
    Apr 2010
    Location
    Sydney
    Car:
    INTEGRA TYPE R
    Quote Originally Posted by tiah313 View Post
    also when the window is half way down and you close the door
    and yer this too atm
    THERES NO CAR LIKE A TYPE R

  2. #14
    Member Array
    Join Date
    Jan 2010
    Location
    ACT
    Car:
    DC2
    man if that's it's problem I envy you

    my cars like suddenly hit PMS or something, everything's just started going wrong.

    anyways hope you fix it ok
    -ZAMMIN-

    "I know who you are, and I know if I make a formal complaint Mr. Benjamin will have to roll over and give me all your details"
    - Integra-GSi 19/11/2015

  3. #15
    your car won't get newer with age. live with it.

    in the mean time, open the trimming and look around for anything unusual.

    check the bottom of the door, has the back rubber strip dropped down to the bottom???

  4. #16
    I had this problem when my d/s window popped out of the track. i undid my door trim and put the window back on track. when doing so, i didnt tighten it enough and when i put the trim back on, it started ratterling, which was odd cause it wasnt ratterling from before.

    So i pulled off the door trim AGAIN and pushed the track in to hug the window a bit better and tightened the bolt. Worked a treat. No more ratterling.

    Try that procedure and see how it goes. Good luck pal.

  5. #17
    Member Array
    Join Date
    Apr 2010
    Location
    Sydney
    Car:
    INTEGRA TYPE R
    fixed.. xD tood the door trim off to check behind expecting some bullshit that would be hard to fix and it was just one of the rubber pieces that the glass ran down had become lose and fallen to the bottom of the door trim...... picked it up applied a suitable glue that bonds to both metals and rubbers applied generously and slid it up the track.... has been perfect ever since...

    no more unwanted rattles for this type R xD

    thanks for all the help
    THERES NO CAR LIKE A TYPE R

  6. #18
    Newcomer Array
    Join Date
    Jan 2011
    Location
    Townsville Queensland
    Car:
    DC4
    It's a common problem with the Integra's either they stick on the way down or they rattle around. What type of glue did you use as mine keep sliding loose on me no matter how many times i fix it?

  7. #19
    Member Array
    Join Date
    Apr 2010
    Location
    Sydney
    Car:
    INTEGRA TYPE R
    i used some extra strength liquid nails.....make sure that what ever glue you decide to use can bond to both metal and the rubber....... and doesnt corrode the rubber... and apply generously..... coz your not going to see it after and you want it to stick well..( i still made sure it was a clean job though.. )
    THERES NO CAR LIKE A TYPE R

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.