Eg suspension into ek

[munkaii]

Whoops! So just to confirm,

EK Forks are smaller and so you need to shave EG control arms?
EG Forks + washers to fit on EK Control arm?

[1590cc]

Yeah mate your right.

[e240]

Whoops! So just to confirm,

EK Forks are smaller and so you need to shave EG control arms?
EG Forks + washers to fit on EK Control arm?

front - the forks should be a direct fit between EG and EK

Rear - the EG shock bottom fork is larger than the EK shock bottom fork
- So for EG shock to fit on EK LCA, Add washers betweek the fork and the bush
- for EK shock to fit on EG LCA, you need to shave the Bush (No pun intended....well, yes..intended)

[1590cc]

His talking about rear forks there?

[RPMTOY]

Yes the front fork strut diameter should be the same between ek ans eg as im using ek struts in eg forks, the only difference is the other end which bolts to the control arm.

[mugen_ctr]

front - the forks should be a direct fit between EG and EK

Rear - the EG shock bottom fork is larger than the EK shock bottom fork
- So for EG shock to fit on EK LCA, Add washers betweek the fork and the bush
- for EK shock to fit on EG LCA, you need to shave the Bush (No pun intended....well, yes..intended)

hahahaha, thats really good info there... are there any significant height difference between ek an eg shockers?

[vinnY]

identical as far as I know.. just the size of the fork at the rear

[e240]

hahahaha, thats really good info there... are there any significant height difference between ek an eg shockers?

Don't know but I run EK Koni yellow shocks with ITR springs (Thanks Shifty) and I like the height it give...

[EG52NV]

My next question is will ef front forks fit my ek front lower control arm and are there any length differences between the 2?