Page 900 of 1384 FirstFirst ... 4008008508908978988999009019029039109501000 ... LastLast
Results 10,789 to 10,800 of 16607

Thread: EP3 Type R

  1. #10789
    Newcomer Array
    Join Date
    Jul 2008
    Car:
    Evo IX and now EP3
    Thanks!

  2. #10790
    Newcomer Array
    Join Date
    Feb 2009
    Location
    Darwin
    Car:
    EP3
    I failed the MVR pits because of my HID lights how do I get around it. I went to an auto lec. They reckon I'd should look into finding some second hand ADM headlights that might fit. They think it will be too hard, time consuming and may not work if we try to swap to normal globs. what should I do? Is there a forum section on this?

  3. #10791
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Ohthatsit
    That's bullshit. My compliance guy swapped out my hid and replaced with normal heligen. It was quite easy to hook up. I remember it was only 2 wires run off from the plug that hook up to the HID ballast.

    He kept my HID bits so I could return everything to OEM HID relatively easily.
    GD3 -> EP3 -> RB3

    FS Rays nuts etc

  4. #10792
    Member Array
    Join Date
    Apr 2007
    Location
    Sydney
    Car:
    EP3
    Yes!!

  5. #10793
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Ohthatsit
    Ok just went to the garage and managed to find the wiring and light bulbs I pulled out to put the HID back. I recall I took some pic on how they are connected to the plugs. Lete have a look later.
    GD3 -> EP3 -> RB3

    FS Rays nuts etc

  6. #10794
    Newcomer Array
    Join Date
    Feb 2009
    Location
    Darwin
    Car:
    EP3
    Really!! ok no worrys I guess my complacence guy should have done that too. Dodge bastard. I'll find a diff auto lec and get them to do that. Thanks heaps

  7. #10795
    Newcomer Array
    Join Date
    Feb 2009
    Location
    Darwin
    Car:
    EP3
    Sweet I'll come back later for a look see cheers

  8. #10796
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Ohthatsit
    Oops I just remember mine is facelift so the wiring is only for low beams. But let me find the pics so u can show your electrican for reference.
    GD3 -> EP3 -> RB3

    FS Rays nuts etc

  9. #10797
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Ohthatsit
    i have problem uploading pic. KIKNHRD please PM me with your email.

    thanks
    GD3 -> EP3 -> RB3

    FS Rays nuts etc

  10. #10798
    Member Array
    Join Date
    Apr 2007
    Location
    Sydney
    Car:
    EP3
    PM sent

  11. #10799
    Newcomer Array
    Join Date
    Feb 2009
    Location
    Darwin
    Car:
    EP3
    We tried today to put the halogens in and disconnect the ballast. Due to only having one globe and high and low beam controlled by the sleave that moves back and forth. We could not get high and low working properly. looks like I may need to purchase a second had set of lights to put in so I can register it, then switch back. Does anyone know what lights would fit a preface lift ep3 (none HID)??

  12. #10800
    Member Array
    Join Date
    May 2010
    Location
    Melbourne, West
    Car:
    EP3
    Depends on the clips that you have in there mate. You could just get H4 bulbs and then modify some pieces of wire to hold the bulb in.

    Just got my Mugen front lip installed today, come home to park it in the garage and SCRAAAAPE - a huge chunk of paint is now missing. FML.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.