Page 908 of 1751 FirstFirst ... 40880885889890590690790890991091191895810081408 ... LastLast
Results 10,885 to 10,896 of 21004
  1. #10885
    VOLTEX Array
    Join Date
    Dec 2007
    Location
    Melbourne
    Car:
    Bus Route 703
    cusco front crossmember!

    Winton 1:37.76 Phillip Island 1:55.27

  2. #10886
    Member Array
    Join Date
    Feb 2008
    Location
    Kellyville, SYDNEY
    Car:
    Civic FD1, Impreza, GE6
    well as a lot of ppl know that the FD crunches gear at first and third (on 8th gen as well)
    so i put better MTF and some MTF additives
    its pretty good so far

  3. #10887
    VOLTEX Array
    Join Date
    Dec 2007
    Location
    Melbourne
    Car:
    Bus Route 703
    i crunched 3rd alot with the skunk2 short shifter... but it might be me though getting too egar changing gears like 2f2f
    Winton 1:37.76 Phillip Island 1:55.27

  4. #10888
    Member Array
    Join Date
    Nov 2008
    Location
    North Shore, Sydney
    Car:
    '03 BB AP1
    my 18x8 +35 rims with 215/40/18 are scrubbing pretty hard with passengers and on corners..... any suggestions? besides rolling guards..

    im gna raise my car tmrw hopefully that solves the issue enough lol

  5. #10889
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    Guys anyone know how to take off those sunvisors? Mine split apart andi need to clip it back, but i need to take it off the car first cos it's too hard to work with up there
    S P A M | W O R K S
    hehe.
    PHC


  6. #10890
    Member Array
    Join Date
    Aug 2007
    Location
    canberra
    Car:
    bmw
    Quote Originally Posted by black8thgen View Post
    my 18x8 +35 rims with 215/40/18 are scrubbing pretty hard with passengers and on corners..... any suggestions? besides rolling guards..

    im gna raise my car tmrw hopefully that solves the issue enough lol
    ...?!? Really? Maybe you just need to scrub away the plastic bits..
    Last edited by ekdez; 04-03-2011 at 05:44 PM.

  7. #10891
    Member Array
    Join Date
    Aug 2007
    Location
    canberra
    Car:
    bmw
    so here is a picture during the day.. sorry for the lousy iphoen pictures and great scenery lawl

    and this is the last picture i will whore of my car :P broom broom!




  8. #10892
    Man thats HOT! loving the stance on the car.
    Just a quick question, where did you guys mount your ballast from the HID on your car? I was reading through the guides, but the mount does not fit onto the screws on either sides --"

  9. #10893
    VOLTEX Array
    Join Date
    Dec 2007
    Location
    Melbourne
    Car:
    Bus Route 703
    man that is phlush

    cable die under the reinforcement bar
    Winton 1:37.76 Phillip Island 1:55.27

  10. #10894
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    i cabletied it to the bar that joins the fender to the chassis (same as wat stigs talking about?) check 8thcivic, i followed their guide
    S P A M | W O R K S
    hehe.
    PHC


  11. #10895
    Member Array
    Join Date
    Dec 2008
    Location
    Brisbane
    Car:
    2007 FD1
    needs moar lows, dez! lol plz keep the pics coming

  12. #10896
    Member Array
    Join Date
    Nov 2008
    Location
    North Shore, Sydney
    Car:
    '03 BB AP1
    yeah man scrubbage hard on the rear.. and on the front under hard cornering on slopes/bumps.... =.=.... i was like wtf.. i even raised my car to have 2 finger gap up front adn 1.5 finger gap at the rears.. still scrubs on hard bumps with no passenger lol wtf.....

    should i just roll my guards?...

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.