Your Mods To 2006-2011 FD Civics

**threesix** · 05-03-2011 02:58 PM

rolling would of been one of the first things done (?)

**black8thgen** · 05-03-2011 04:38 PM

i need more camber as well.. dez r u running any camber arms/

**aznboiio1** · 05-03-2011 06:33 PM

woot ordered my
re30's , they will arrive in approx 8 weeks time D:
rep mugen lip kit, arriving soonish

hhmm i be thinking Gruppe M or J's racing intake

cant decide :L

&& quick Q, my car lately has like a delay on starting from i turn the key, it takes like a 5sec crank, then starts,
it happenslike the first time of the day, doesnt matter if its morning/arvo or night...
ive taken it to my local mechanic and last week to Honda for a rip off service and to check it out, and they go nothings wrong.. TT
car is 1 year old, wat can i do now?
p.s. and ive done the stuff in that thread from chib, about this topic,

**aznboiio1** · 05-03-2011 06:34 PM

&& ej20i, pm me your no agens, i lost it T_T

**ekdez** · 05-03-2011 07:18 PM

Originally Posted by black8thgen

i need more camber as well.. dez r u running any camber arms/

Yeah man, rolled rears flat, and pulled a bit.. Got skunk2 rear camber kit, the gold one, and shaved it a bit to allow more neg camber. Running -3.5 degs on the rear but my coils sink on the rear when I drive , hence why my car is at this height. Plus I got a Shiz driveway..

**aero** · 05-03-2011 10:37 PM

Originally Posted by black8thgen

i need more camber as well.. dez r u running any camber arms/

u shouldnt need camber arms to pull off 8" +35 on 215/40 tyres. i was running 9" +35 with no problems with scrubbing on the rear. my guards had been rolled, but they're not fully flat. id just call it a mild roll.

**Stig** · 06-03-2011 12:01 AM

i ran an 8+38 with 225 without any problems :S

**black8thgen** · 06-03-2011 12:15 AM

How low were you? Why the fk am I scrubbing with 18x8 +35 =\.......

**Stig** · 06-03-2011 01:04 AM

i think 1 finger gap all round, well the front would scrub on a major bump

**black8thgen** · 06-03-2011 02:18 AM

were ur guards rolled? im on 2 finger gap front 1.5 finge gap rear and rear scrubs with passengers over bigger bumps n harder turns

**ej20i** · 06-03-2011 07:32 AM

depending on coilovers as well
stig was running teins, harder spring rate than the tanabe (correct me if im wrong)
i was looking at spacers on saturday, and we fit a 6mm spacer, looked ok to me den we fit a 18x9 +35, from the drop, it looked like it wont scrub with a 225
roll ur guards first den see how it goes