'99 Civic Sedan - sound system build up

[dc292177917]

just couple of snapshots of the boot, prior to covering it with suede...

comments?

no comments...
one word...
awesome!!!
i wish i m rep-ed enuf to rep u
cant wait to see when it's all done up(Y)

[wixxer]

I thought I might share these photos with you! Not quite finished but getting there guys!!!, Cross fingers, that everything works as it should!!!
Here you go:














Keep comments comming, otherwise I might just "forget" to upload photos of when it's all done

[sxmachine]

Man top efforts keep the updates coming we r enjoying the good quality work going into this system build up

[dc292177917]

wt r those sour cream for? lol

[wixxer]

wt r those sour cream for? lol

Sour WHAT?

[wixxer]

More updates here!!!

As you know, mostly I have to do things twice, because there are always some mistakes involved - not always my fault, but anyway....
The day after I finished the door pods I realized that all the hot glue I used to fix suede around the holes had failed! Even worse - I left the door pods on the drivers seat (car is outside, under the hot sun) and had to see that hot glue has MELTED on one spot at the back completely, and has left a bloody glue mark on the seat!!! Luckily, after it hardened (after some shade had covered the seat), it was easy to clean up the mess .
Here you can see the glue failed. Simple solution - staple gun and heaps of staples!!!
Bottom line: Hot glue shouldn't be used in cars - at least not in Australia! Way too hot here!!!


Finished top cover. Even here had to do a thing twice: after mounting it and trying out the light, half of the led strip had failed - probably I damaged it as it's a bit flimsy and not of a very good quality, especially the wires, they're soooo tiny! Anyway, lucky that I ordered two pairs, but only needed 3 pieces, so the spare one came in handy!!!



Finished trimming the door covers - that was the easiest part of the whole job so far!!!


Back to the sub enclosure and the aero port - all finished, painted and mounted. Positioning is not perfect but it shall be good enough for a car sub.







Mounted crossovers on one door, tomorrow will do the other one



Will have to measure the volume of the sub enclosure again, just to make sure I'm in the right size range. Then, either cut out some of that foam, or stick the can inside again


Keep the comments comming!!!!!!!!!!!

[davidvtec]

Mate, love your work. Your sons going to have one hectic sound system man. Cant wait for the end result !

[tylerjames]

hangingggg to see it finished.
nice job yo

[wixxer]

It's all done, gotta wait 'till Wednesday to take it out for a photo shooting !!! Hang on!

[curtis265]

sweeeeeeeeeeeeeeeeeeeeeeeet as

[wixxer]

It's all done, except for a few small changes/addons, which will find place in near future
Anyway, here are the pics of the finished product, so far we've got positive comments from people who have seen and listened to it

Enjoy yourselves, and don't forget to comment!!!!!
Thank you all for following this thread!

[1996_EK_Civic]

now that is just plain AWESOME!!
you have 2 sets of splits yea? where is the other tweeter?