Page 2 of 3 FirstFirst 123 LastLast
Results 13 to 24 of 28

Thread: Suspension?

  1. #13
    Member Array
    Join Date
    Dec 2003
    Location
    Syd
    Car:
    F20C Clubman Build
    I wouldnt go more than 22mm sway bars. 26-27mm diameter is too big. Even with reinforcement brackets or what not it will rip right out. Your reinforcement will be stronger than the bolt hole location.. you will find one side of the bracekt will rip the bolt right out. and you will be left with a hole where the bolt you to go.
    I would stick to 22mm, 22mm will allow for some flexing.. But if you really want to have 27mm just for the sake of having them then be cautious of how hard ur cornering..One of the two bracket WILL come out... Good luck..
    ______________________________________________
    F20C Clubman Build

  2. #14
    Member Array
    Join Date
    Feb 2004
    Location
    Adeliade
    Car:
    CRX Gen 2
    I wouldn’t go for 27mm rear sway bar as said above; the risk of damaging your ride on the street is high due to poor road surfaces.
    If you’re going to get coil overs I would only suggested quality brands; would steer clear of cheap Taiwan products. As we all know suspension is one of the most important parts of a cars, handling and safety.

  3. #15
    Member Array
    Join Date
    Feb 2005
    Location
    Sydney
    Car:
    B18A1 Integra LS
    i took my car to pedders the other day and they did that test thing on my car, wid the paper and the squiggly lines.. hahahaha, they said i need new rear shocks and bushes.. they also sed they would fix the squeak in my suspension.. something about a fulcrum rubbing on something.. i dont know.. i wasnt listening, i was just looking at the price.. hahahaha..

    basically they said

    new rear shocks and bushes
    fix the squeak
    and
    lower the car 2" all around

    they quoted me $1400

    am i gettin shafted or is that a decent price?

    andddddd

    is there anything else you guys would reccommend i get besides what needs fixing??

  4. #16
    Member Array
    Join Date
    May 2004
    Location
    ブリスベン
    Car:
    ホンダ
    pedders shop (Springwood) is a joke.........i went there ask the price for fully adjustable sussy for EK/EJ......the guy ask me "a u serious?" i said "Yes" ......then they told me is $1000 each!......... .......What the?
    地下インポート
    www.undergroundimports.com.au

  5. #17
    Member Array
    Join Date
    Oct 2003
    Location
    Sydney, Aust.
    Car:
    EP3-R
    Quote Originally Posted by LS Integra
    i took my car to pedders the other day and they did that test thing on my car, wid the paper and the squiggly lines.. hahahaha, they said i need new rear shocks and bushes.. they also sed they would fix the squeak in my suspension.. something about a fulcrum rubbing on something.. i dont know.. i wasnt listening, i was just looking at the price.. hahahaha..

    basically they said

    new rear shocks and bushes
    fix the squeak
    and
    lower the car 2" all around

    they quoted me $1400

    am i gettin shafted or is that a decent price?

    andddddd

    is there anything else you guys would reccommend i get besides what needs fixing??
    thats a rip off! for that much u can buy a decent shocks + springs - the squeeking sound could be ur springs/shocks r worn out...it was like mine when my stock sussy & then i bought my self a decent springs & shocks & suspension bushings.
    BBC/IC

  6. #18
    Member Array
    Join Date
    Feb 2005
    Location
    Sydney
    Car:
    B18A1 Integra LS
    where do u guys suggest i go? or should i just buy the parts myself and chuck them in myself?

    but keep in mind, i'd prefer 2pay someone to do it, coz i dont trust myself.. lol knowing me i would do it wrong and when im goin 110 on the m4, it breaks and i smash into a pole and die... i would prefer someone else to do it, coz if it breaks, then at least i can get compo

  7. #19
    Member Array
    Join Date
    May 2004
    Location
    ブリスベン
    Car:
    ホンダ
    kings super low + koni shocks......thats the most common combo for road use here.........where u locate mate? if u from brissy i can hook u up for cheap installation
    地下インポート
    www.undergroundimports.com.au

  8. #20
    Member Array
    Join Date
    Dec 2003
    Location
    Syd
    Car:
    F20C Clubman Build
    Pedders has to make money somehow...
    when they told u $1400, did u say to them "No bull?"
    ______________________________________________
    F20C Clubman Build

  9. #21
    Member Array
    Join Date
    Feb 2005
    Location
    Sydney
    Car:
    B18A1 Integra LS
    Quote Originally Posted by Terry
    where u locate mate? if u from brissy i can hook u up for cheap installation
    im from syd dude.. does the springs come wid bushes? or do i need to buy them separate, coz mine are completely shot.. like cracked and peeling away crazily...

  10. #22
    Would you need to get a camber kit if you were to get koni yel + king super low?

    and how do king super low's compare against eibach prokit/sport and H&R sport as in durability and handling?

  11. #23
    Member Array
    Join Date
    May 2004
    Location
    ブリスベン
    Car:
    ホンダ
    be honest i never try eibach prokit/sport and H&R sport but they known are better quality......... kings spring feels a bit hard but bang for your bucks.....and there are so many ppl here using it.....wont be wrong.....

    with $1400 u can get the brend new sussy setting.......good luck!
    地下インポート
    www.undergroundimports.com.au

  12. #24
    Member Array
    Join Date
    Mar 2005
    Location
    Sydney, Castle Hill
    Car:
    integra type R DC5
    can i fit lowered king springs to my dc5r without upgrading the shocks cos there pretty good?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.