hondata s300 from US

[Tom eg5]

From Japan?... You mean the US?

[DC2-PWR]

From Japan?... You mean the US?

i dont even remember anymore, lol. but he gets real good deals and people use it and they're very happy with it.

fatboyz39 prices are simular to mugen_R aswell.

[CRXDEL501]

so r u getting s300 complete ecu or just the unit only?

I'll just get the unit.

$495 is pretty good

[Slaz]

Just remember, they dont go in all ecu's though peeps. They can be had for cheaper than 495 also, was that with shipping?

[honda_zivic]

what u mean doesnt go in all ecu?
shipping was 60 if it was the same one on ebay.
theres also cheaper ones on a few websites not ebay tho.

[CRXDEL501]

Just remember, they dont go in all ecu's though peeps. They can be had for cheaper than 495 also, was that with shipping?

Can you elaborate dude?

I thought they were good in any...

Dc2r ecu?

[CRXDEL501]

what u mean doesnt go in all ecu?
shipping was 60 if it was the same one on ebay.
theres also cheaper ones on a few websites not ebay tho.

List the sites

[honda_zivic]

few good rep site examples:

http://www.xenocron.com/hondata-hond...s-c-42_56.html

http://cgi.ebay.com.au/Hondata-S300-...item43a5c6d5db

http://www.phearable.net/shoppingcar...s-c-23_25.html

http://www.hamotorsports.com/hondatas300.html

still more sites but their on my desktop pc, and cbf turning that shit on takes 30min to load.

but i still buy from ebay least u get protection. just to be safe than sorry.lol

[ECU-MAN]

Just remember, they dont go in all ecu's though peeps. They can be had for cheaper than 495 also, was that with shipping?

S300 will fit a USDM AUDM and EUDM ( non JDM ) ECU. the ECU needs to be preped. Compatible ECUs are

P06, P07, P08, P28, P30, P72, P75, PR4

S300J is ment for the JDM type ECU, so it can fit

P07, P08, P29, P30, P72, P75

I might haved missed an ECU moddle and the ECU's need to be modified to accept the S300. some ECU's listed above do not have VTEC or 4Wire O2 Heater support, These features are added when the ECU is made S300 ready. also you can add PWM for boost/NOS controll and IAB support to any of the above ECU's that dont already have it.

Prelude and Accord ECU's will not accept any Hondata Unit. The OBDI ECU must have the M66X207 series MCU in order to be Hondata compatible.

All the above goes for using Crome, Hondata, Neptune, Uberdata, hondalogger ect. all the same

[ECU-MAN]

Can you elaborate dude?

I thought they were good in any...

Dc2r ecu?

you cant add a S300 to the DC2R P73 OBDIIa ECU. you have to convert to OBDI with a convertion harnes

[CRXDEL501]

you cant add a S300 to the DC2R P73 OBDIIa ECU. you have to convert to OBDI with a convertion harnes

So I'd have to get a p28 or p73 ecu with hondata and the conversion harness I use to have but yeah... Obd2 to obd1

[Super-DA9]

I bought a new S300 unit from bisimoto USA just recently for $526. just waiting on it to arrive, postage wasn't bad, $59 for international express.

Getting adrian at TODA to install it to my P72 and tune very soon. Will post results when it's done!