Your Mods To 2006-2011 FD Civics

[ekdez]

soooooo aero. live my dream on LM's paint the center white and rear mount them.

[aero]

LMAO! yeah... i would, but im not sure it will look good on a silver car . i was thinking of just getting them all fully polished and having some gold bolts or something. but im poor atm. need money for other things

[Stig]

brought an evo 9 wing today

[pitiek]

Installed Tein S-Tech plus cusco front strut brace and beaks swing arm brace today..
I also change the muffler to Tanabe, I don't know what the model, could be the medallion G, is but it sounds bassy and not too loud..
Pics soon..

Is it necessary to get need a camber bolt kit for the front and camber arm for the rear since I got the car lowered?

Could I use this

http://cgi.ebay.com.au/ws/eBayISAPI....=STRK:MEWAX:IT

[pitiek]

I found this as well
http://cgi.ebay.com.au/06-10-Honda-C...item483fccc534

[ekdez]

dont see how that would work on our rears. :\ but anyhow

[fitme]

@pitiek..yep you can use that type of rear camber kit..one of my mates is using that one...instead of replacing the whole camber arms..

[evolution]

I found this as well
http://cgi.ebay.com.au/06-10-Honda-C...item483fccc534

I am using something similar in design to the eBay items, but different brands. SPC camber bolt for the front and Ingalls camber kit for the rears. Also using Tein S-Tech springs.

dont see how that would work on our rears. :\ but anyhow

Instead of replacing the entire camber arm, it replaces the brackets that hold the camber arm to the car body. Works pretty well for my purposes and is heaps cheaper than a camber arm

[ekdez]

ahh i see =] i replaced my rear camber arms with the skunk2 one.

[pitiek]

I found Ingalls front and rear but they are more expensive compared to the J-power front and rear kit

http://cgi.ebay.com.au/ws/eBayISAPI....=STRK:MEWAX:IT

http://cgi.ebay.com.au/ws/eBayISAPI....=STRK:MEWAX:IT

What is the advantage getting the Ingalls over the J-power? Are they made from stronger materials?

Regarding the alignment, does most shop that do wheel alignment familiar with these type of camber kits or do they charge more to do it?

[aero]

from my experience, they charge u the same, but tell u that the point of using camber arms is so u DONT get uneven tyre wear LOL.

[evolution]

No idea mate. I've heard of the Ingalls brand before and that's why I got it. Never heard of j-power.

I got mine fitted by my mechanic and then sent to a specialized suspension workshop to get it all aligned.