Yo man,

Mine is a 97 VTiR. Theres 3 different ignition switches around, 1 for GSi Integra, 1 for VTiR Integra, 1 fore ITR DC2.

I used mine from a 01 DC2R, only issue was the main plug that connects onto the relay, the wires were in different areas, but thats easy fix, all my mate did was change wires around

See the white piece plastic, just take it out with a long nose pliers, then take out the wires
http://i357.photobucket.com/albums/o...B/P1100155.jpg

Then, have a look at your plug on the relay, try and match the wires so it plugs and makes contact. Colors of the wires should be the exact same.

This is the 2nd plug, it was exactly the same as my VTiR one, so I didn't need to move around
http://i357.photobucket.com/albums/o...B/P1100155.jpg

Just check in case though, if you install this new plug and it just cranks and doesn't fire up, then definetly wires need to be changed around.

If you get a VTiR one they should be the same, but check.

Other than that anything else let me know, I'll check on this thread regulary.

Good luck