cu2 mods

[yungquan]

try 20 x 9.5 +35 will sit flush with the guards. seen it done

you will need to roll guards and add more negative camber
i've done it once..

its poke not flush LOL

[natnat]

you will need to roll guards and add more negative camber
i've done it once..

its poke not flush LOL

that's instant defect if the popo ever checks it.

[yungquan]

that's instant defect if the popo ever checks it.

That is correct! hence the removal of it from the car

[furythree]

ok guys just got an offer for 5zigen ZR+520 or sc300 for $1200
http://www.ozhonda.com/forum/showthr...arket-Part-Etc
have to scroll down

best deal so far, shame theyre 18s. hows 5zigen like as a brand?
also this may have been posted befor, but...holyshit!
http://www.drive2.ru/cars/honda/acco...51910583/#post

after browsing the russian site and seeing so many that are similar to mine, made me realise the importance of chrome on grey car lol. not gunna carbon wrap my grill after seeing all the custome and mugen grills, realise stock is the best

http://s2.images.drive2.ru/car.photo...d5f7-large.jpg
honda accord romeo hsv?

back looks cool tho
http://s2.images.drive2.ru/car.photo...4952-large.jpg

has red suede interior too
http://s2.images.drive2.ru/car.photo...0-original.jpg

[MR_LATE]

ok guys just got an offer for 5zigen ZR+520 or sc300 for $1200
http://www.ozhonda.com/forum/showthr...arket-Part-Etc
have to scroll down

best deal so far, shame theyre 18s. hows 5zigen like as a brand?
also this may have been posted befor, but...holyshit!
http://www.drive2.ru/cars/honda/acco...51910583/#post

after browsing the russian site and seeing so many that are similar to mine, made me realise the importance of chrome on grey car lol. not gunna carbon wrap my grill after seeing all the custome and mugen grills, realise stock is the best

http://s2.images.drive2.ru/car.photo...d5f7-large.jpg
honda accord romeo hsv?

back looks cool tho
http://s2.images.drive2.ru/car.photo...4952-large.jpg

has red suede interior too
http://s2.images.drive2.ru/car.photo...0-original.jpg

nice find

[maclovin]

same same
both can b short or long, just if u prefer silver or black (silver looks better, personal preference since our engine bay is mostly black)

Should I go for short ram intake or long one? is true installing CAI could lose your factory warranty? Has anyone experienced this before?

[MR_LATE]

Should I go for short ram intake or long one? is true installing CAI could lose your factory warranty? Has anyone experienced this before?

when u buy the takeda intake it comes in two parts, so u can mod to make it long down to fog light or just to the air box (for wet seasons), im pretty thats what they say on the site, also injen u can get a discount apparently from heeltoeauto :S , as for warranty i dont kno sorry

EDIT: i just found this not sure if its been posted before, http://cgi.ebay.com.au/Acura-2009-20...item4aa7c67303

[MR_LATE]

That is correct! hence the removal of it from the car

hey yungquan, what is the size of rims if i wanted to put 19 inch on mine?, i know nothing about rim size, offset and the such,,

[yungquan]

hey yungquan, what is the size of rims if i wanted to put 19 inch on mine?, i know nothing about rim size, offset and the such,,

as a reference, mine is Rear: 19x9.0 ET +41 and fronts are 19X8.5 ET+40

thats the most u wanna go without any guard rolling.

[MR_LATE]

as a reference, mine is Rear: 19x9.0 ET +41 and fronts are 19X8.5 ET+40

thats the most u wanna go without any guard rolling.

ill write that down, thanks

[1six8]

in regards to short ram or cold air intake, I have spoken to a few dealerships service department and they all said it does not affect warranty. Once you start to play with the headers and so forth then the warranty becomes void.

have a takeda sri intake in mine with the fujitsubo legalis r exhaust.

the sri drowns the sound of the exhaust but adds a nice raw deep tone for daily driving.

[Lemonhead]

Yeh im VERY set on Rota boosts. BUT I NEED 19's!! WAHhh the design is very simple and basic, theres gotta be brands out there that look similar but in 19s?

the legend wheels come close too, what do u guys think http://www.ronjonwheels.com/ronjonim...arge/tsx83.jpg

*edit* i am really loving the legend wheels, especially the raven black machined
5x114.3

what size dimensions offset would fit the cu2?

i so agree with you about the Ronjon wheels fury. I was very keen on the Legends style too, especially the Liquid Graphite 19". I also emailed them and they gave me the same answer.. that's its too expansive to post here.
But looking at all the other wheels options you have posted, it may only cost ~400 for postage if they put their acts together...
i would have been happy to pay that extra 400 for the Ronjon Legends too...you will probably be the one or only ronjon shod Euro in Oz... shame..