Hid fix?!

[jorziie]

I recently bought a HID Kit for my EJ (Low beam only) basic plug and play stuff. Worked for a week and only the passenger side busted. It wasnt the bulb that was broken, so I took it out and replaced it back with the original bulb and it also didnt work but when i flicked on high beam, it works? Help.

[Symphorced]

Have you checked the fuse yet? Could have possibly blown.

[Lukey]

Have you checked the fuse yet? Could have possibly blown.

wouldnt a fuse kill both and not one?

[flipfire]

nah you should have one for each headlight so it doesnt take both lights out.

[jorziie]

cool ill check tomorrow, thanks!

[jorziie]

okay so the fuse was broken and i went to buy a packet of fuses to replace. however, it keeps breaking everytime i flick on low beam?

[flipfire]

Check the wiring man, there might be a short or something.

[tiksie]

Definitely a short somewhere if it keeps blowing.

How many watt is it ? Get a multimeter and check the volts/

[jorziie]

okay wtf, i put back in my original bulb and the low beam now works.
so it has something to do with my ballast. but then im sh1t confused as to why the drivers side hasnt busted out yet?

[ASSaZiN]

I Had the Same issue, I purchased a set of HID's Online on Ebay. I let them Know the problem and they replaced the Ballast and Gave me an extra set of HID's for the F*** around
Swap the Ballasts to Double check that, If it then Blows Out the Right Low beam you know you need to get that replaced

[Lukey]

go back to stock cos hid's are for ricers