Bedding in New Pads & Rotors

[WATAJK]

Hey guys,
as title stated, got some new pads on the front and dimpled and slotted rotors for the front.. I fitted these just now, depressed the brake pedal so that it went firm and that well well..
Got rear slotted rotors going on the rear tomorrow...

Wondering how do i 'bed' these items in...
What the best way going about it..

Thank you for your constructive help

[geeang]

What pads are you talking about? Not all pads are the same, all pads have difference bedding-in procedures while some pads don't require breaking-in at all.

Quick google of "breaking in brake pads" would have gotten this link:
http://www.tirerack.com/brakes/tech/....jsp?techid=85

Otherwise just take a look at the box the brake pads came in, or go to the manufacturer's website, they will usually have instructions for bedding in their pads/rotors.

[WATAJK]

Just OEM Pads, but i put new rotors on the front aswell (EBC 3GD Slotted & Dimpled)

[riruiz_88]

make sure to properly bleed the whole braking set up, and clean the rotors to remove the protective oil/film from the factory