Anything can pretty much fit under the dc5, just depends on how much camber your looking at running.

Alot of people say bad shit about spacers etc. If your getting the shitty JustJap ones, yeah most likely - however if u do it properly, u got no problems! I did it properly, 25mm in the rear is hubcentric, 15mm up front with the DRS series, im runnig H&R extended studs that were pressed in with brand new oem bearings just to be safe. I run the spacers as having a bit of neg camber for track purposes is always good, so on the track, I have the camber already dialed in, and when going to track days, the spacers come off

If your looking for anything semi-aggressive fitment and DONT want to roll guards, be prepared to get some parts to tweak camber and run alot of camber!