[CL9] Low offset wheels

[dee-y]

Hoping my new xd9's don't rub the struts........

[Philip Lee]

so how did you go dee-y?

[dee-y]

Hey Phillip,

Doing my masters atm, so busy times. Will fit them this weekend. Hoping my the best!

[BLKWLF]

Hi guys. Quick question. Will i have any issues with fitting 18x8+37 front, 18x9+32 rear? Not lowered, but will be at a later time by a bit.

[namtaro]

will be fine, just watch out the fronts might rub inside, but rears are perfect and 5mm spacer in front is win good luck

[dee-y]

I had 18x8+38 on my previous set up and there was no issues.

[BLKWLF]

Thanks a lot guys!

[liberty68]

file:///D:/Honda%20Accord%20Euro/IMG_3744-3.jpg
file:///D:/Honda%20Accord%20Euro/IMG_3747-3.jpg

Finally installed my eibach springs with bilstein shocks now need 18'' wheels LOL

what is the best offset using 18 x 7.5 wheels with no rubbing and flush with guards

[racerwannabe]

file:///D:/Honda%20Accord%20Euro/IMG_3744-3.jpg
file:///D:/Honda%20Accord%20Euro/IMG_3747-3.jpg

Finally installed my eibach springs with bilstein shocks now need 18'' wheels LOL

what is the best offset using 18 x 7.5 wheels with no rubbing and flush with guards

+30 to be safe or you could go down to +25 or less but you may need to roll the font guards.

[PLYBOY]

Here's my CL9 with 19 x 8.5's at 30p, im running 225/35/19 all around with no issues... Its sitting on 40mm H&R's springs, I have Camber arms in the rear.

-.45 degrees up front. ( once i get my front arms i will drop it to about -1.5 up front )
-2.5 in the rear.

[Rein]

thats a sick car.. tell me thats a real mugen lip kit.. the fitting is perfect..

[dee-y]

Ok finally got my xd9's on. front 17x8.5+32 rear 17x9.5+38. Still need to put my grill on later this week, so will post more front shots etc... after.