***Official What did you do to your EK today***

[TbM]

Meguiars Plastx works quite well too if your not doing it by hand(use a DA, rotory or powerball), you dont need to use sandpaper with it if your only removing oxidized plastic so saves you a fair bit of time, only time i sand headlights is when they are deeply scratched or have damaged clearcoat.

[FAITHLESS]

Buckled a wheel so while it's getting fixed i have this hideous space saver on. Tragic.

[chauster]

Got new tyres! Got rid of the worn kumhos. Put on some fresh silverstone evol 8. 205/45/16. Does fantastic for 85$ each

[mugen_ctr]

Got new tyres! Got rid of the worn kumhos. Put on some fresh silverstone evol 8. 205/45/16. Does fantastic for 85$ each

where from man????? im gonna need new tires soon lol, they look good for a budget tire

[Raztaz]

lip back on. will attend to those flaking window bits next

[Alvis]

bought 4 x new Honda oil filters; 1 x new petrol filter. Changed oil + oil filter. Petrol filter + airbox clean will have to be for another day...

Checked tyre pressure and pumped fronts back up to 40 with my trusty bike pump (front right outside was wearing slightly more than middle), and left 32 in the back - think I had them pumped too much with middle wearing a little more than the sides.

Oh, and what ever happened to genuine parts made in Japan ? This is the first I've ever seen of genuine parts not being made in Japan. What's the world coming to these days... sigh...




AND, I always wanted to modify one of these images you see around on the net sometimes - gave it EM1 wheels and a dark window tint LOL!!! Rear mugen wing went into the too hard basket tho lol.

[chauster]

where from man????? im gonna need new tires soon lol, they look good for a budget tire

I got them through work so i got trade price. If you want to nkow where i got them PM me. Not allowed to advertise here.

[SuperJDM.]

bought 4 x new Honda oil filters; 1 x new petrol filter. Changed oil + oil filter. Petrol filter + airbox clean will have to be for another day...

Checked tyre pressure and pumped fronts back up to 40 with my trusty bike pump (front right outside was wearing slightly more than middle), and left 32 in the back - think I had them pumped too much with middle wearing a little more than the sides.

Oh, and what ever happened to genuine parts made in Japan ? This is the first I've ever seen of genuine parts not being made in Japan. What's the world coming to these days... sigh...




AND, I always wanted to modify one of these images you see around on the net sometimes - gave it EM1 wheels and a dark window tint LOL!!! Rear mugen wing went into the too hard basket tho lol.

haha pixel cars, did it for 3 years good fun.

save the image is PNG and why did you scale down the car? Also we dont copy and paste rims on we do it pixel by pixel

[Red_EG4]

I can remember the change from Japanese made filters to Thailand/Korean made filters being mentioned on OzHonda
Some dealers were selling both.

[TbM]

Changed the oil from motul to castrol, new oil filter, reset ecu, adjusted the base idle and timing.

Modified my boot light to fit a 30 smd led panel, its ******* bright as.


Fixed my hotspots in my led conversion.


Converted my gear selector to leds, will put pics up tomorrow, need to work out which colours i like and its a bit late to be working on the car and i think ive done enough today lol.

[blastnpast]

Ordered my fresh billet style blackworks LCA in red due to my blox ones blowing the bushing (ever since install the bushing's were shithouse)


Ordered my new OEM facelift bumper as my old one was rooted

[Alvis]

Changed the oil from motul to castrol, new oil filter, reset ecu, adjusted the base idle and timing.

Fixed my hotspots in my led conversion.

Wow - only 67k+ kms...