Longer Bolt Engine Stand to mount D16A8

[hectic_filo]

hi guys,

I bought an engine stand from super cheap auto..which is the brand SCA.

I wanted to bolt the D16 motor to it, but the Gearbox bolt to the Motor is not long enough to screw through from one side to the motor.

I been looking for longer screws than the normal bolt with the same size, but super cheap, repco, autobarn and bunnings dont have a longer bolt the size i am after would be M12x1.25 100mm,

because the standard gearbox bolt to the motor is M12x1.25 75mm

can anyone help me, or you guys found a different way to put the motor to the engine stand.

let me know guys

cheers

[hectic_filo]

can anyone help me? or give suggestions please =)

[markismaximus]

are you talking about the bolt that is bolted through the block into the transmission?
so there is just a hole in that part of the block, its not threaded?

[markismaximus]

this one?

[mocchi]

yea should be those ones mark.
op: use engine mount bolts.

[90LAN]

if not go to nut and bolt shop

[markismaximus]

just go to bunnings and get a galvanised roof truss bolt. they come in longer lengths and are cheap as shit. like a few dollars

[cotties]

Or wreckers for some large Honda suspension bolts
Like the large long bolt for the front shock fork

[mocchi]

Or wreckers for some large Honda suspension bolts
Like the large long bolt for the front shock fork

im pretty sure sussy bolts arent big enough for tranny hole.
analogy: my asian penis + sasha grey's a-hole.

[hectic_filo]

thanks guys.. bought a longer bolt from an engineering place at parra.. engine is now mounted to the engine stand.. cheers guys..=)