Turbo 3g lude

[Jccck]

I'm using a 38mm Wastegate too, 11psi spring.
Hopefully it holds up, but it should be fine.. Guess i best play close attention to the Boost Gauge when the time comes, and make sure i'm not getting any uncontrolled Boost at high RPM!
880cc, big! I've opted for 750's.. Seen RC's flow charts for various sizes and 750s seem to retain a good flow at idle.. Whereas any larger start to get patchy, i need this to act like a normal car hehe.

And how do i give rep points? Lol.

[phattzy]

turbosmart informed me that the 38mm with 14psi spring with the eboost2 EBC should get 30psi with out alot of problems ? with 880cc we can get to that magic 500fwhp mark , was looking at 1000cc but to big and will be hard to get a nice idle , i think you click the little star under my username on a post ? not really sure ? i just clicked onto yours and yeah . owell new windscreen booked in for next friday 22nd and have to get a few other little things aswell . not long now .

[phattzy]

new xenon bulbs









and finally something ive been needing for awhile now

[phattzy]

ok front end stripped , old ball joints out , dust cover's removed and regressed the hub bearings , just waiting on the ball joint's to arrive !!!!!!!!!!!!!!! with my luck it will be tomorrow when i have to fly out !!!!!!!!!!!!!!! . also decided to start the inlet mod and well it has turned out better than expected , just waiting for a h22 throttle body to arrive , hoping to see the results on the dyno









and the inlet

[phattzy]

pics of the new throttle body bolted up to the chamber , also ordering new injectors BOSCH INDY BLUES 1600cc and 044 pump/bracket and magnafuel filter and rosko racing fuel rail .

throttle body













P/S pump pully

[phattzy]

update , finished template for the catchcan , going to drop it off tomorrow for fab work , also started the door trims and installing the mb quarts . just waiting on my tax return and bonus from work to finish it off and get it on the road and tuned !!!!!!!!!!!!

[phattzy]

my mate matt the boily decieded to knock up the catch can . my pretty happy with it just needs a good sand and polish and the adaptor blocks for the -10 fittings .

[Vvvtec]

Some nice welds on the catch can, props to matt! Now get it looking shmick like the rest of the car (minus the orange )

[phattzy]

i'll have it polish today and bolted down . haha dont hate the orange its the only other colour from purple i like .

[SnowWhiteLude]

i'll have it polish today and bolted down . haha dont hate the orange its the only other colour from purple i like .

Yes for god sake no more lavendar interiors pleasseeee! LOL.

[phattzy]

haha , id only expect that from you dude . haha

[phattzy]

todays effort , spare box pulled down ready for a dc2-r lsd

CALIPARS







and the GEAR BOX















the only bit of damage i could fine