no fuel after conversion!

[4000gt]

Finished installing a b16 into an ek1.
also did auto to manual while at it.

Problem.... one of the relays underneath the steering while buzzes when ignition is switched... tried swapping with spares i had. Still buzzes. Fuel pump won't prime or turn.

Fuel pump tested! OK
Battery charged!OK
Fuses checked! OK

What to check for?
Is there another relay somewhere i should be looking for?

[redefine]

which relay is buzzing? that might give you a clue what to check next

[grifty]

check how much voltage you are getting to the relay, it sounds like it is not enough to keep the contacts closed. Maybe a bad ground on the relay or somewhere??

[ACTI0NMAN-1]

I had a similar problem when my main fuel relay died. So replaced the relay but engine wouldnt start and i could hear a buzzing. It turned out the MFR dying caused the fuse to short in the engine bay.
Maybe check those fuses again.

[4000gt]

thanks guys.

Could be any of those.... i also pulled out an alarm/immobiliser that wasnt used anymore.... could have a short somewhere

[ECU-MAN]

do you get the engine lamp on the cluster when you turn on the ignition ?

[blastnpast]

Clear inbox