if you can pick up a D16y1 head - put that on there instead with a D16y1 head gasket
you just need to wire in a line for the vtec and a P28 ECU to run it and you got yourself a mini-me =)

otherwise...
- get the head skimmed at a machine shop
- lap the block surface
- clean all surfaces until spotless
- use a D15b7 or D16a6 head gasket

D16y1 intake manifolds are also a nice bolt on upgrade for the D15b7
and the D16a6 cam can be put in for a bit of extra power as well
the D15b7 is such an underestimated engine

check out my build thread =)