[CL9] Low offset wheels

[marquee]

about to organise my setup soon BC Racing Coilovers. I was going to stay conservative but saw tranz car on the weekend and decided **** IT.

Enkei GTC01 18x8.5 +30.

0 finger gap in winter ill raise it for the the snow. You reckon just rolled guards at the front or will i need a light pull.

Rear will be probably guards rolled and remove bumper tab.

Tyres 215/40(or45)18

Neg camber make it fit just rotate once a month.

How do you guys reckon this will look?

[JDM-EGG]

hey guys
thinking abt buying wheels for accord euro

18x9 +25 all round , its running 215/40 tyres

what would need to be done to run these ?

[longers]

about to organise my setup soon BC Racing Coilovers. I was going to stay conservative but saw tranz car on the weekend and decided **** IT.

Enkei GTC01 18x8.5 +30.

0 finger gap in winter ill raise it for the the snow. You reckon just rolled guards at the front or will i need a light pull.

Rear will be probably guards rolled and remove bumper tab.

Tyres 215/40(or45)18

Neg camber make it fit just rotate once a month.

How do you guys reckon this will look?

you'd need your guards to be rolled. personally i'd go for 225/40/18 def not 45 affects your speedo more. why not just keep the stockies for the snow?

hey guys
thinking abt buying wheels for accord euro

18x9 +25 all round , its running 215/40 tyres

what would need to be done to run these ?

im running x9 + 20 on my accord which has similar guard characteristics to the euro. you're guards are going to be rolled w/ slight pull. and camber kits for the front and rears.

[marquee]

you'd need your guards to be rolled. personally i'd go for 225/40/18 def not 45 affects your speedo more. why not just keep the stockies for the snow?

Yer i am keeping them for the snow but will still need to raise it to put my chains on i think not sure.

Ok so will keep to the 215/40/18 i like streched but will try both.

Anyone got any ideas on front camber kits

[JDM-EGG]

will neutral camber be enough ? or front and rear camber kits are a must after a roll /pull to the fenders ?>

[longers]

fronts if you're on a budget get the hardrace ones. if you're feeling generous get the spoon ones. do not get skunk2.

[longers]

will neutral camber be enough ? or front and rear camber kits are a must after a roll /pull to the fenders ?>

natural camber wasn't enough for me.

[TRaNz]

about to organise my setup soon BC Racing Coilovers. I was going to stay conservative but saw tranz car on the weekend and decided **** IT.

Enkei GTC01 18x8.5 +30.

0 finger gap in winter ill raise it for the the snow. You reckon just rolled guards at the front or will i need a light pull.

Rear will be probably guards rolled and remove bumper tab.

Tyres 215/40(or45)18

Neg camber make it fit just rotate once a month.

How do you guys reckon this will look?

roll, trim inner fender and light pull for fronts, with the 215/40
rears, same deal, not so much needed a pull. just rear tab shaved and 215/40
although the rears might not be as flush compared to how the front is.
neg camber needed, esp for the front, like -2.
i use skunk2 front camber kit and ingalls rear.

hey guys
thinking abt buying wheels for accord euro

18x9 +25 all round , its running 215/40 tyres

what would need to be done to run these ?

yep, like long said, 215s all round.
guards, rolled, inner fenders trimmed, light pull, shaved rear tab and camber kits front and rear.

[marquee]

Hard race looks like the winner was never getting skunk so many bad reviews but 500 for front camber **** my life

[TRaNz]

LOL, wats bad about skunk2? ROFL, half of tsxclub and myself use them....LOOLOL oh dear.

[d_evilz]

tranz, i wanna see your car one day lol!

[TRaNz]

tranz, i wanna see your car one day lol!

hahahaaha, nothing spesh man, just an ordinary CL9 with few mods here and there =]