Cupholder from other car into eg?

**crobaa** · 07-10-2011 05:31 PM

Hi guys, I have an eg with jdm dash and center console so the adm cupholder no longer suits & I dont have the jdm cup/coin holder. Has anybody modded a cupholder from another honda (integra, prelude, ek etc...) or even a totally different car to make it fit?

**BennyH** · 08-10-2011 08:03 AM

A member on here has done it with a cupholder from a daihatsu into his ek. Looks pretty neat, ill link his thread here once I find it LOL.

**Sydsyd** · 08-10-2011 08:37 AM

http://www.aerpro.com/list.php?pcode...BON++&cat_sno=

u will have to relocate ur headunit to the jdm console and put the cupholder set into the old headunit slot

**crobaa** · 08-10-2011 09:09 AM

Yep thinking I might do that ^ thanks

**whitecomet07** · 11-10-2011 11:03 AM

i have the same setup as you. i just go on ebay to buy those single din cup holder for Honda. you can put them either below the air vent. or the top of your double din console. they both fit pretty well. but you might find if you fit the cupholder in the double din compartment. its quite annoying when you drive manual. otherwise you can try CRV cup holders. they will fit into your eg ok. like i said they not expensive at all. max $20 inc shipping.

good luck! and post some pictures!

**crobaa** · 11-10-2011 11:33 AM

Yup I moved my head unit to the double din part near the shifter, bought a cupholder off eBay for the original head unit location. I still have one spot left on the lower part, might get a 3 gauge single din holder

**whitecomet07** · 11-10-2011 03:23 PM

okay one more hint for you. if you are looking to get a 3 gauge single din holder. look for the Nissan Pulsar ones. they have good fit. cheap in price. and there are a lot of them around. the holder is tilted in an angle so its easier for the driver to see. as to what gauge to put in. its up to the guys imagination

**crobaa** · 11-10-2011 03:41 PM

An aftermarket one to suit pulsar or oem? If so which oem one? On eBay there's aftermarket metal ones to suit a single din slot and their angled towards you too. Kinda looks like stairs if you turn it around lol. It's about $18 delivered

**whitecomet07** · 11-10-2011 03:47 PM

there should be an Nissan OEM one for pulsar. its not an aftermarket item. but yeah.. its really up to you. $18 sound like a good deal! does it include gauges?

**crobaa** · 11-10-2011 03:50 PM

Lol no way including gauges. What model pulsar is it from?

The gauges I'd ideally want are oil temp, trans temp & oil pressure (or water temp)

**whitecomet07** · 11-10-2011 03:55 PM

the pulsar with the SR20 turbo in it. one with the vent on the bonnet. forgot the name. they used to call it the mini-zilla. haha. i think that has boost, oil temp, oil pressure in it.