Quote Originally Posted by Master_Scythe View Post
Hey guys, Its not settled yet, but I may soon be in posession of a DC5S (yeha!!!!!!!)
Now, its an 05 that im looking at. As such, Its VERY unlikely that I can KPRO its ECU.

HOWEVER, would any PRD ECU work, as long as the correct map was loaded?
Such as one out of a 2003 civic type r (ep3)? (i may have the ability to get one)

Kpro software lists the TypeS as PRB (the USA RSX-S uses this) would I just load this one onto the PRD?

Obviously I have to disable the imobiliser option.

I know i'm way ahead of myself, I may not even end up with the car, but I'm exremely excited about the Kseries and have been studying everything i can.

Any help is appreciated.

Scythe.
Further to what Jimmy has said,
You could use the PRD, but you'll need to send it to Rev-Zone or a US supplier to have the K-Pro board fitted.
Also you will need a jumper harness:
http://www.hondata.com/kpro0506.html
http://k-tuned.3dcartstores.com/ECU-...2-04_p_58.html

Re imobiliser,
The PRD is not fitted with this function.
To eliminate green blinking light you'll need to unplug the green plug from the imobiliser sensor on the steering column.
having no imobiliser also means your fuel pump relay trigger wire will have to be repinned to suit the PRD.