DC2 98+ Reverse Light Not Working

[johnnynugun]

Hi guys,

My reverse light on my Integra DC2 98 isn't working. I've checked the bulbs and there are fine.

From what I've been told, it could either be the switch or fuse.
Do anyone know where the switch and fuse are located on the car?

Many thanks,
John

[mocchi]

driver side, under dash. above bonnet open latch.
theres a plastic panel you can remove, it should have list of fuses printed on a clear plastic sheet.

welcome abourd john!

[stndrd]

if the fuse still has power on both sides, the reverse light switch is located on the gearbox

[jeffreymui]

had this problem with my ek ages, it happens to be the wire wasnt even hooked up at the first place from an improper engine conversion from previous owner, the the fuse/bulb is fine, look into that

[Riceboy]

Yeah check the switch/sensor is plugged in. Plug found infront of gearbox just above the clutch slave cylinder.

[johnnynugun]

thanks! i'll have a look this weekend.