What cams do i have?

**hitoriko** · 23-11-2011 09:43 PM

Hi guys,

i've been searching around all different sites online trying to work out what camshafts i have

I have 2 pairs, one set that cam with my spare head (i was told by the seller they were standard b16a ones)

SET ONE:

The second pair i got them thrown in with a bunch of other parts i purchased, again i was told by this seller that they are type R

SET TWO:

can anyone identify these and set me straight.

Thanks

**na-118** · 23-11-2011 11:48 PM

can't identify them,

but if you have :

get a pair of verniers, look in service manual or online,,

and measure the lobes ends and maybe there will be pics accompanying them

good luck

**mocchi** · 24-11-2011 07:30 AM

use google mang. its goot. yeah byuddy.

http://www.ff-squad.com/tech/temp/VtecCams.htm

**hitoriko** · 24-11-2011 08:35 AM

Originally Posted by mocchi

use google mang. its goot. yeah byuddy.

http://www.ff-squad.com/tech/temp/VtecCams.htm

As i said i looked and im still not sure unless i have itr and ctr cams

so you tell me

**mocchi** · 24-11-2011 08:40 AM

how about start with taking a good, clear pictures.
then you read post #2, and #3 as base of your information.

**TODA AU** · 24-11-2011 09:06 AM

Old dog says.... (at a guess)

Above is CTR/ITR exhaust cam

Above is CTR or 00 AUDM Intake cam

Above is 96Spec JDM ITR intake camshaft

But clearer photo's would be much better

**hitoriko** · 24-11-2011 09:10 AM

Thanks TODA ill get some tonight i took those @ 10pm

**hitoriko** · 24-11-2011 05:42 PM

Here are some HIGH RES Pics:

**dougie_504** · 24-11-2011 06:07 PM

Fingers crosses for ctr cams bro. Much tougher

**GSi_PSi** · 24-11-2011 06:34 PM

Originally Posted by dougie_504

Fingers crosses for ctr cams bro. Much tougher

98+ audm/jdm ctr and itr are the same cams

**dougie_504** · 25-11-2011 12:04 AM

Great answer Adrian, can't rep yet though sorry.

Novak, I'm using Supertech springs/retainers. Good price/quality man, I recommend them!

Originally Posted by GSi_PSi

98+ audm/jdm ctr and itr are the same cams

I was talking about the comparison between B16A and B16B because hitoriko has a JDM B16A swapped into his ED9 bro.

**hitoriko** · 25-11-2011 05:17 AM

Originally Posted by dougie_504

Great answer Adrian, can't rep yet though sorry.

Novak, I'm using Supertech springs/retainers. Good price/quality man, I recommend them!

Yeah i was looking on ebay and they are a pretty good price too! i might just get a kit and sell the ITR springs and go from there
just ordered some Supertech Valve Stem Seals so i may aswell get the retainers, guides and springs to match!

Originally Posted by dougie_504

I was talking about the comparison between B16A and B16B because hitoriko has a JDM B16A swapped into his ED9 bro.

Correct i hvae an OBD0 JDM EF8 B16a convesion with Y1 LSD Box