"If there is no struggle, there is no progress. Those who profess to favor freedom, and deprecate agitation, are men who want crops without plowing up the ground, they want rain without thunder and lightning.”
The overall diameter and depths of the rear LCA mounting bushes are different between EK/EM1 & EG/DC4. You will need to create spacers that can handle the load differences or get some function 7 rear LCA's and pm me for modified mounting bushes to suit EK/EM1 rear coilovers (as I'm running EK Tein Monoflex's in my EG with the modified bush/function 7 combo)
em/ek/ej use a smaller bush, so it wont be a direct fitment, u need roughly a 8mm or smaller spacer to fill the gap if ur planing on using eg/dc coilovers on a em/ek/ej
but if u plan on using the other way, ek coilovers on dc, u need to mod the bush so its smaller to fit it.
You dont need F7 parts, as oem is just fine, more so a bling factor, but if u can get modified bushes to fit them up, thats the easier route
Fronts will fit on all the cars mentioned but rears wont fit.
On the other hand. If you have an ek or em1 and want to run dc2r/eg6 suspension, You could buy the Function 7 Lca that allows you to run that suspension. You cant use dc2r lca on your ek/em1 because it will put your suspension out of allignment.
I have found a caterpillar bush that is the right dimensions for the function 7 arms (internal diameter wise) and are the right width for ek suspension to fit onto the EG arms, tho I am abit reluctant to just give out the part number as it took a fair amout of time/money/trial & error to get the right one, but would be happy to source if people want them
Bookmarks