Base header worse than DC5R?

[Timmy_B]

If you are lucky you can pick up the JDM DC5R headers for under $200, I did and it was a very good bang for buck mod.

Also note you will need an EP3R front sway bar to fit the header.

AUDM DC5R headers are rubbish

To add to what Tai has already said.

You will need to run type r/s exhaust or JDM after market with these headers as the cat angle will NOT match base exhaust.
I am using JDM DC5R headers atm and it is a very good upgrade. cheap and easy.