wheels

**viinnh** · 27-12-2011 11:21 PM

i dont remember, but with a spoon cf lip it was about 2 - 3 fingers off the ground

**charliebrown** · 27-12-2011 11:24 PM

Mm just doesn't add up? I've got a 6cm wheel gap. But the front lip is 19cm off the ground. So it's still gonna be sitting damn fkn high and can't go any lower than that with the 205/45

**Bludger** · 28-12-2011 08:13 AM

Originally Posted by viinnh

what rims are nice to suit a black ek with something along
15x7 +30 to +35
15x7.5 +30 to +35
15x8 +30 to +35

maybe +35 with chunky tyres to fill the guards ? i dont want +25 axis, sportmax etc. with stretch tyres and dump to make it flush etc.

Originally Posted by charliebrown

Bit late but enkei rpf1 15x7 +35. Can get brand new for $900-950

Originally Posted by viinnh

nah too weak offset going on 7" inch wide

lulz had

**charliebrown** · 31-12-2011 07:17 PM

Ended up tucking front wheels, -1 finger gap ish. Surprisingly there is no scrubbage with a 7" +40. On full lock the fender sits bout 5mm from the tyre tread but maybe it's just the coilovers are stiffer so theres no vertical wheel bounce. Guess i won't need the guards rolled/pulled or even remove the fender liner. Good offset! weak... but practical

**NeedVtec** · 31-12-2011 08:25 PM

got pics mate?

**charliebrown** · 31-12-2011 09:19 PM

Yeah mate. It went a tiny bit lower than that after a short drive.

**trism** · 31-12-2011 09:42 PM

Looks hot but man.

**NeedVtec** · 01-01-2012 12:48 PM

very nice mate

**Hellomotog** · 03-01-2012 10:45 AM

spray your stockies black.
http://www.flickr.com/photos/73349005@N02/6624191809/

im lucky they were alloy. also they say enkei and honda on the back. which is pretty cool.

bout 50buks in paint and paper.

2 coats black.
1 coat clear