Quote Originally Posted by markismaximus View Post
ok, so HONDA is wrong? All the service manuals stating oil pressures must be wrong? I said 10psi at idle is the MINIMUM as per the FSM.

Download all the manuals and look for yourself, its under the engine lubrication section of the manual. Facts don't lie mate.

Here ---> http://www.spoonertuner.com/manuals
Honda Manuals are reference guides and often will change due to wear and tear of the engine. Therefore readings, quantity will no longer be close to the ORIGINAL manufactures specs. UNLESS your going to REBUILD your entire motor back to OEM spec.

when noobs ask for help or answers, they are looking for REAL life experiences/answers unless they state "need answers to OEM spec" ..in this case its an overall experience/answers.

Manuals will never be as accurate as circumstances changes. but YES your Manual guides are correct if the topic was based on OEM spec.

Manuals are guides, but when it comes to REAL life experiences these books are often put aside and you learn from your own mistakes or experiences.

i always read manuals before installing/building anything, but at the end of the day these products are never manufactured to what the manual says, theres always a slight modification required or missing.

thats my two cents yo.

back to OP - there no need for bible stories etc :P