Page 2 of 2 FirstFirst 12
Results 13 to 20 of 20
  1. #13
    Member Array
    Join Date
    Nov 2010
    Car:
    inb4yursorryass
    Quote Originally Posted by TbM View Post
    Your incorrect IV73CI, i dont know where you pulled that minimum 30 psi figure from but different engines require different pressures. Op has a ep3r listed as his car under his avatar so would assume this is for a K20.

    Minimum oil pressure test for K20a3, should be similar to Op's engine.
    again ..these are manuals/guides.. for OE spec motor/oil.

    use a different oil (not OEM honda oils), install a aftermarket cams, start porting the head, change pistons to a higher/lower CR, change your oil pump to a high flowing type then do an oil pressure reading ..i bet it aint OEM spec anymore

    i dont doubt what the manufacturer/honda made their engines to have at OEM spec but once u start modifying then it will change. just like any other cars.

    thats what im trying to say ...
    B to BFrank to K .... ive had it ......

  2. #14
    Member Array
    Join Date
    Jun 2006
    Location
    WA
    Car:
    EG+CL9
    Corolla GTi 4AGZE built in oil pressure gauge

    which model was that? - pretty sure the AE92 GTi we are building at the moment doesnt have one?

    i think the JDM model got a digital dash?
    ----------------------------
    D15b Turbo EG Sedan Build + CL9 Lux N/A Build
    http://www.ozhonda.com/forum/showthread.php?t=127680

  3. #15
    Member Array
    Join Date
    Oct 2006
    Location
    Hunter Valley NSW
    Car:
    lownslowsedan
    Ae92 SX and GTi with the 4age had an oil pressure gauge in the dash.
    to see all of my build, checkout


  4. #16
    Member Array
    Join Date
    Jun 2006
    Location
    WA
    Car:
    EG+CL9
    AE92 + 4AGE discussion moved to here...

    http://www.ozhonda.com/forum/showthr...30#post3206330
    ----------------------------
    D15b Turbo EG Sedan Build + CL9 Lux N/A Build
    http://www.ozhonda.com/forum/showthread.php?t=127680

  5. #17
    When all else fails, consult Honda.

  6. #18
    Ozhonda Supporter Array
    Join Date
    Jul 2004
    Location
    Brisbane
    Car:
    MV Agusta F4
    Real world figures oil pressure figures for B series for example. 25-30 psi at idle, 75-80 max psi. K series I would think very simular.

    Been covered before here:

    http://www.ozhonda.com/forum/showthr...re-Temperature

    http://www.ozhonda.com/forum/showthr...r-oil-pressure
    Deano.

  7. #19
    Member Array
    Join Date
    Aug 2011
    Location
    Brisbane
    Car:
    EP3R
    Thanks guy! The debate is great, i'm actually learning alot from it haha I guess i'll just have to see for myself what my car will read when I get to installing it once I bring the car for a general service

  8. #20
    Member Array
    Join Date
    Nov 2010
    Car:
    inb4yursorryass
    Quote Originally Posted by DLO01 View Post
    Real world figures oil pressure figures for B series for example. 25-30 psi at idle, 75-80 max psi. K series I would think very simular.

    Been covered before here:

    http://www.ozhonda.com/forum/showthr...re-Temperature

    http://www.ozhonda.com/forum/showthr...r-oil-pressure
    ^^
    Real world Figures = Real life experiences..

    Great response .. so others have actually experience the same readings as mine/similar.

    THREAD CLOSED
    B to BFrank to K .... ive had it ......

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.