Best Brake Pads to use on Slotted Rotors?

[Fredoops]

Goodridge are ADR approved ... unlike other branded braided brake lines like PMU =/

ADR rules had Changed years ago.

ADR 42 - General Safety Requirements
The function of this Australian Design Rule is to specify design and construction requirements to ensure safe operation of vehicles.
Vehicle Standard (Australian Design Rule 42/04 ?
General Safety Requirements) 2005
Compilation: 1 (up to and including Vehicle Standard (Australian Design Rule
42/04 ? General Safety Requirements) 2005 Amendment 1)
Compilation Date: 12th October 2007
Compiled by: Vehicle Safety Standards, Department of Transport and Regional
Services

15. BRAKE TUBING AND BRAKE HOSE
Flexible hydraulic brake hoses, air or vacuum brake tubing and air and
vacuum hose, flexible and hydraulic power hose between the Brake
Power Unit 31/00 or Brake Power Unit 35/00 and the master cylinder
or its equivalent must conform to SAA, SAE, BS, JIS, DIN, ISO or ECE
Standards specified for flexible brake hoses, air brake tubing or hose or
vacuum brake tubing or hose or hydraulic power tubing or hose and be
fitted to the vehicle as to prevent chafing, kinking or other mechanical
damage under normal motion of the parts to which they are attached.

That means any brake lines that adhere to any of above overseas standards are ADR okay.

So your JDM, USDM, EUDM brake lines are just as legal. So my USDM $110 set of S/S lines are just as legal as your $150+ Goodridge lines made in Canberra (iirc by Neal bates Automotive)


A lot of ADR design rules had been "globalized" over the past decade due to various free trade agreements and the WTO. Of course the retailers will never tell you that cause they want your money.