Results 1 to 9 of 9

Threaded View

  1. #7
    Member Array
    Join Date
    Nov 2011
    Location
    nimbin
    Car:
    DC5R, EG & EP3R
    ive had this problem twice. on my old bike it was because i had a leak on one of the four short fat hoses that connect the carby to the engine. also backfired so i replaced the leaking hose, cleaned the whole carby and balanced all four carbys. ran great.

    on my current bike it has a problem with similar symptoms without the backfiring. but its because i havent started the bike for over a year. i have to jump it and it still runs dead. too lasy to diagnose it but could be battery or dizzy like others have said. plus have to flush out the oil and old petty before i try anything.

    also could be the regulator, alternator, short somewhere in the electrics (happened to my bro and he couldnt go over 3800rpm without stalling). check the fuses, earth etc. dont forget to check the main fuse next to the battery.

    what does the bike idle at, over heating? happening when cold?

    these bikes always have problems.. especially the carby but goes hard for a 250

    btw if you just sprayed carby cleaner straight into your carby, change your sparkies. it wouldve fouled it up

    and if your still stuck, go on cbr250rr forums... or to a mechanic lol

    hope that helps
    Last edited by JPR28610; 23-01-2012 at 04:06 PM.
    BARPPP

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.