[CL9] Low offset wheels

[jzx_andy]

Sup dudes... i have a set of tein street basis coilovers and i've maxed out the rears in terms of lowness.. i want to go lower without switching coilovers though.. the rear sits at 1 finger gap atm.. i'm thinking of removing one of the collars, but the thing is that on these coils, the collars sit under the springs, not on top.. would i have any problems? also is there anything else i can DIY to get moar low? cheers!

[moogle]

hi just a question if the evo 7 oem rims will look good on a euro? and will these specs fit the cl9 on stock height
tyres: 235 45 17
rims 17'8'35+
thanks

[MWAKU]

evo 7 wheels dont even look good on the evo. lol

[jzx_andy]

they'll fit easy but wider/lower offset wheels on stock height looks preeetty silly

[Fredoops]

Evo 8 rims look strangly good on the euro:
http://www.tsxclub.com/forums/tsx-bu...lly-coils.html

evo 7 wheels dont even look good on the evo. lol

Evo7 rims dont look that bad actually
http://www.tsxclub.com/forums/1st-ge...-rims-cl9.html

[MWAKU]

nope, still definitely not a fan. tho beauty is in the eye of the beholder.

[MR2QIK]

Sup dudes... i have a set of tein street basis coilovers and i've maxed out the rears in terms of lowness.. i want to go lower without switching coilovers though.. the rear sits at 1 finger gap atm.. i'm thinking of removing one of the collars, but the thing is that on these coils, the collars sit under the springs, not on top.. would i have any problems? also is there anything else i can DIY to get moar low? cheers!

Hey mate, got a picture of how low you were able to go with the rears max'd?

[TRaNz]

Sup dudes... i have a set of tein street basis coilovers and i've maxed out the rears in terms of lowness.. i want to go lower without switching coilovers though.. the rear sits at 1 finger gap atm.. i'm thinking of removing one of the collars, but the thing is that on these coils, the collars sit under the springs, not on top.. would i have any problems? also is there anything else i can DIY to get moar low? cheers!

I have Tein Super Streets, height adjustment is same for basics n SS, wat i did was order custom springs made for the coils from Tein site themselves, was like 200 ish for a pair. spring was 250mm i went 200mm and upped the spring rate a kilopound wateva the unit is....LOL

[jzx_andy]

I have Tein Super Streets, height adjustment is same for basics n SS, wat i did was order custom springs made for the coils from Tein site themselves, was like 200 ish for a pair. spring was 250mm i went 200mm and upped the spring rate a kilopound wateva the unit is....LOL

yeah i think i'll do that.. i like the idea of being able to slam it.

MR2QIK.. i've got a pic in this thread somewhere, just look up my posts haha.. in a bit of a rush atm

[x10Hz]

^why dont u just adjust the spring purch? it is free.

[TRaNz]

^why dont u just adjust the spring purch? it is free.

Brulee, our Tein SS/Basics arent like the Buddywubwubs, we onli have the collars/perches at the bottom and wehn we adjust the height n shiet, it moves the whole spring up and or down. We aint lucky enough to have the ones where you can move the body up n down as separate to the spring n pre loads.

[ergot]

hi guys just wondering if F: 18x9 (+21) R:18x9.5 (+25) will fit to euro? ive lowered my acr by about 1.5 to 2 inch

cheers