Results 1 to 12 of 16

Hybrid View

  1. #1
    I just purchased a ryco oil filter, 5w40 SN edge (they didn't have any w50) and a cheap sca drain pan, funnel and filter change tool. I won't be changing it for an hour or so. Is this stuff ok? If not, tell me now!

    Thanks again.

  2. #2
    Just noticed super cheap have 20% off this weekend. Bummer, I purchased this stuff from super cheap.

    Anyway, I couldn't change the filter. The tool I got in the kit was too small to fit it by a tiny bit.

    Car drives a lot better though, although I can't say the engine sounds quieter.

  3. #3
    Member Array
    Join Date
    Jan 2010
    Car:
    AccordCB7 Turbo
    Quote Originally Posted by adamc11 View Post
    Just noticed super cheap have 20% off this weekend. Bummer, I purchased this stuff from super cheap.

    Anyway, I couldn't change the filter. The tool I got in the kit was too small to fit it by a tiny bit.

    Car drives a lot better though, although I can't say the engine sounds quieter.
    If the engine is loud, and ticky.. You could have your mechanic re-adjust your tappets.
    8-9 thou of an inch on Inlet, 10-11 thou of an inch on Exhaust iirc.
    Using a thicker oil will also lessen the noise.
    It's not 4x4 status, think of it as "Winter Mode".

  4. #4
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Quote Originally Posted by adamc11 View Post
    I just purchased a ryco oil filter, 5w40 SN edge (they didn't have any w50) and a cheap sca drain pan, funnel and filter change tool. I won't be changing it for an hour or so. Is this stuff ok? If not, tell me now!

    Thanks again.
    Even the Penrite HPR5 5w-40 (just became full synthetic) would be fine. That's $40 bucks at the moment.

    40 should be plenty weigh for daily or even spirited driving.

    Speaking about noise, when was the last time the carby / injectors got cleaned
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

  5. #5
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Quote Originally Posted by adamc11 View Post
    I just purchased a ryco oil filter, 5w40 SN edge (they didn't have any w50) and a cheap sca drain pan, funnel and filter change tool. I won't be changing it for an hour or so. Is this stuff ok? If not, tell me now!

    Thanks again.
    Even the Penrite HPR5 5w-40 would be fine. That's $40 bucks at the moment.

    40 should be plenty weigh for daily or even spirited driving.
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.