Results 1 to 12 of 45

Thread: Full Respray

Threaded View

  1. #4
    Member Array
    Join Date
    Jul 2007
    Location
    JDMD15B
    Car:
    14EGs/8EDs/3EKs
    Yes it's possible to get a decent finish.

    Google has plenty of info.

    An oven isn't required since you will be using Acrylic paint. Or you can hire out a booth and spray 2pak which is more expensive and requires more skill.

    Basic run down of what's required:

    Colour of your choice 4L = $150 - $500 (depending on colour)
    Acrylic thinners 4-8L = $100~
    Various sheets of sandpaper [wet/dry] = $20~
    Sanding block = $1~
    Air Compressor (Super Cheap Auto has these on special quite frequently with kits) = $150 - $300
    Acrylic Clear 4L = $80~
    Acrylic Primer 4L = $60~
    Masking Tape [few rolls depending on how much you use] = $5 - $15~
    Drop sheets = $5 - $10
    Wax & Grease Remover 1-5L = $10 - $30

    Optional:
    Spray putty/High Fill = $15~/Can (Fixing small imperfections)
    Bog/Filler = $15~
    Applicator = $5~
    Guide Coat 1L - $20~

    Time: 1 Day ~ 1 Month

    Weather - 24-30 degrees low humidity low wind
    Last edited by tiksie; 22-02-2012 at 12:25 PM.
    JDM D15B - you wouldn't understand

    No K-SWAP ? No worries - Unfriend

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.