D16Y4 with dual carbs?

[shake]

Hey guys,

I've been reading up on mini me and D16 to carb swaps and while the following sounds like it would be straight foward it rarely is...

Could I swap a D16Y4 from a 98 EK1 into an Aus ED6 dual carb civic, using the stock manifolds inc carbs and ed6 dizzy?

What about the other sensors and engine mounts.

[shake]

OK, I have just read that if I use the d15b4 mounts on the d16y4 it should bolt up. Is this correct.

[~Sp33~]

Use the mounts to suite the chassis, not the motor. The carb intake will bolt up to the block. The swap has been done quite a few times. Have a search, there's a couple of build threads here on ozhonda that will give you plenty of food for thought.

[kraiye]

did i read this right? carbs on a D16Y4? cool

[shake]

Yep thats right, just fact hunting at the moment.

[kraiye]

nice. g/l with the project.