Hondata FlashPro tested in CL9 Euro - it works !!! TSX 07-08 ECU required.

[Fredoops]

what ports ? All ports are the same as TSX 04-08 and Auto gearbox have same gear rations, doesn't metter if it's TSX or Accord Euro CL9 My car is manual and one friend has auto, we both use FlashPro !!! All works as with OEM ECU, what else you want ? Reading old posts and searching problems which doesn't exists.... and how SAFC II is related with FlashPro, explain me ?

Fredoops start reading all from scratch and think logicly, sometimes it looks that you don't know what are you talking about.

Srsly, I was asking a question not patronizing what you've said. Watch the tone.


My questions were precisely because I was following logic... The post on Hondata forums stated the cruise didnt want to work due to gear ratio, which is different between TSX and Euro, so was it illogucal for me to question whether the auto tranny has the same ratios between USDM and AUDM and whether it'd work?? Also the post re:VFAC2 was related to the pin out ports, since Hondata sells a special adapter for 04-05 ECU's was it illogical to question whether the pin out's would match for my 03 because it was even different among USDM's??

The more we assume we know the more we dont know, unless you have a EUDM/AUDM/JDM stand side by side and take it apart we wont know what else is different, for example, EUDM CL9's use Lucas Calipers while the rest of world uses Nissin, both called CL9, but you wont know till you take the wheels off.