i piece of metal bar drilled to suit the seat mount holes., then mount the FE to the bar. took around 30 min, cos we had to cut the bar shorter with a hand saw.
Car: 05' Civic Turbo Car: EK 97'
Motor - D17 Motor - B20T
Winton - 1:47 Winton - 1:46
i piece of metal bar drilled to suit the seat mount holes., then mount the FE to the bar. took around 30 min, cos we had to cut the bar shorter with a hand saw.
like Riced_Civic said, had to use longer bolts to bolt seat back down (30mm), also used a 5mm thick washer between metal plate and seat rail to stop the seat rail U shape flattening.
Bookmarks