Best headers for stock vtir

[DC2-PWR]

Geez you give shit advice at times ffs

The jdm itr 4-1 is proven to give gains over the stock audm manifold..

Opinions are like arseholes, everyone has one. So sometimes you should learn to accept someone else's opinion.

However I agree with your choice since the OT bought an ITR exhaust, it would be a great combo with the jdm 4-1. Better than the AUDM anyway. However the flange is different so I don't think it'll bolt up.

So then crxdel501 opinion seems much wiser

[CRXDEL501]

Opinions are like arseholes, everyone has one. So sometimes you should learn to accept someone else's opinion.

However I agree with your choice since the OT bought an ITR exhaust, it would be a great combo with the jdm 4-1. Better than the AUDM anyway. However the flange is different so I don't think it'll bolt up.

So then crxdel501 opinion seems much wiser

You must spread sound reputation before giving some to dc2-pwr again

[TGW92]

Opinions are like arseholes, everyone has one. So sometimes you should learn to accept someone else's opinion.

However I agree with your choice since the OT bought an ITR exhaust, it would be a great combo with the jdm 4-1. Better than the AUDM anyway. However the flange is different so I don't think it'll bolt up.

So then crxdel501 opinion seems much wiser

Yeah as far as I am aware jdm 4-1 will not work with audm itr exhaust, didn't Rhys do a thread recently detailing this in detail with photos as well.....

+1 rep Moiz

Edit: here is that thread;

http://www.ozhonda.com/forum/showthr...st-differences

No headers, but exhaust lengths are clearly different, jdm headers will be too short