hi ask for b18c2

[kj9438]

hi guys , i brought a complete b18c2 lastweek . me and my mate want try to rebuilt it ( first time )　　ｔｈｅｎ　ｆｉｔ　ｉｎ　ｏｕｒ　ｅｇ　 , we seen a rebuilt kit ( gasket , piston timing belt) from usa ebay . but only seen they have for
94-01 HONDA ACURA INTEGRA GSR ENGINE REBUILD KIT B18C1

my question is is the b18c1 same as our b18c2 ? can i use this kit ?
ｔｈａｎｘ　

[Swaggasaurus]

yes mate it should be the same as the b18c2.

[Super-DA9]

what are you replacing in the overhaul?

[kj9438]

i want to replace all the gasket , and piston ring . timing belt

[oopoc]

May as well replace bearings while it's apart

[kj9438]

ye will do that .

[FAITHLESS]

B18C2 kit will be fine.
You should also check the condition of the valve assembly but most of the work will on them will need to be carried out by a professional.

[shepparton]

lol, wnat to rebuild the engine and you not even know if the kit would be the same or not btw good luk

[gen2 CRX]

You can use that kit but you better make sure you get your block resurfaced, honed or bored if needed by a professional and your crank linished also get you cylinder head serviced.

[FAITHLESS]

i would personally be pretty wary of rebuilding a valuable and complicated engine such as a B18C1 for my first. i have a JDM B18C in my garage that most likely needs a rebuild but I'm too scared to touch the internals for my first rebuild. i'm leaning towards buying a sub $1000 car for a rebuild and resell before getting into my B18, just to be 100% sure i know what i'm doing when i pull it apart.
just saying....