Quote Originally Posted by slow_poke View Post
Hopefully this persistence pays off.
Persistence has paid off.

Fold-in mirrors are GO!

I can confirm that the diagrams above are correct and work.

I made one alteration and that is I didn't run the EARTH wire all the way over to the dash switch - I EARTHed the black wire via a ring terminal just below the mirror relay in the passenger kick panel.

In fact I out clevered myself and thought I would use one of the accessory terminals on the under dash fuse box for PWR to limit splicing to one wire. I used my multimeter to locate a pin that came on when the key was turned to IGN1 and ran the PWR wire to it via a crimped terminal. It didn't work. I didn't try connecting to a PWR ON terminal (that is one that has constant power).

So two wires were spliced at the dash switch - PWR 12V (BLU/WHT) and the fold-in wire (BLU/YLW).

Job done.

Some photos and a short video hopefully tomorrow.

Peter