All Motor B20Vtec

[senna]

Since the original build I have only ever had the Koni Yellow with coilovers, nothing fancy but seems to be well set up for Phillip Island as my best time there with the B18/Vtec is 1:51
The pickup points have been lowered to lower the roll centre. The top arms are ajustable so I can dial in the right neg camber and caster but that it !
The front roll bar is stock and the rear is Whiteline 19mm I think ??

Thanks for that - i hope alot of people read this thread and think twice about cheap coilovers when you can get these results with Koni's...

[gbpracing]

Thanks for that - i hope alot of people read this thread and think twice about cheap coilovers when you can get these results with Koni's...

I do remember having them modified to suit the lowering of the car so that I would not have bump steer....