OK. Here's some photos I took.
Here's the old mirror mechanism. Note the large spring that is used to allow manually folding in of the mirrors. Compare this with the JDM motor in an earlier post.
The old mirrors. I stripped the fold-in motors from these off the JDM DA.
Fold-in dash switch on the left from the JDM DA; original switch on the right
To make the fold-in work, you have to set the switch to the middle where the small dot is (so neither left nor right). Then one press activates the button and then you press the button again and the mirrors fold in or out. Another press and they fold back.
Bit of a mess having to take out the dash but this enabled me to run all the wiring under the cabin underlay, thereby keeping it out of the way and safe
Peter
Reply With Quote
Bookmarks