The B20VTEC discussion thread

[butterfingers]

B series for Boys
K series for Kings

[gbpracing]

B series for Boys
K series for Kings

Each to their own I say !
As long as its a Honda, Its all good :-) and Im not on here to be critical of others !!

[butterfingers]

it was intended as a joke.

the best type r ever made has a b-series in it imo

but then again it becomes a god when you put a k-series so idk now hmmm..

[gbpracing]

it was intended as a joke.

the best type r ever made has a b-series in it imo

but then again it becomes a god when you put a k-series so idk now hmmm..

If I had my time over again and if had known my build was going to cost me ##k I would have gone k motor for sure :-)

[butterfingers]

32k?

its a honda not a fighter jet lol

please elaborate

[gbpracing]

32k?

its a honda not a fighter jet lol

please elaborate

Long story, see previous post

[ericl33]

LOL
The car is for fulltime track and needs to last as long as the last engine build, that being 10 years,,,

so is the 85mm the limit of the b20 sleeve?

[tinkerbell]

so is the 85mm the limit of the b20 sleeve?

no, 85mm is not the limit of the B20B sleeve.

[ericl33]

no, 85mm is not the limit of the B20B sleeve.

thanks.

[tinkerbell]

The car is for fulltime track and needs to last as long as the last engine build, that being 10 years,,,

so what class are you racing in?

with 85mm you are at 2020cc so in the over 2 litre class?

that is why i stayed at 84.5mm so i am in under 2 litre class...

[tinkerbell]

thanks.

but i doubt the benefits of such marginal increases in capacity could outweigh the risks of damage due to poor tuning/bad fuel...

[ericl33]

but i doubt the benefits of such marginal increases in capacity could outweigh the risks of damage due to poor tuning/bad fuel...

no, wasn't trying to push the limits of the sleeve, just curious