Page 4 of 6 FirstFirst 123456 LastLast
Results 37 to 48 of 69
  1. #37
    Member Array
    Join Date
    Oct 2005
    Location
    Brisbane
    Car:
    ap1.5
    Quote Originally Posted by VeYzZii View Post
    Is that a joke?
    This made me LOL!

    ...pretty sure he wasnt joking...

  2. #38
    Member Array
    Join Date
    Sep 2004
    Location
    101 MotorCafe Performance/Tuning
    Car:
    01POV
    Quote Originally Posted by VeYzZii View Post
    The 215 tyres wall bellys out as there 50 profile and i guess there designed like that.
    Well here's your problem.... 215/50 ain't gonna work cause the tyre size is way off. You need 215/45 or 225/45 or 235/40 or 245/40 either of them combinations should work. NOT 215/50

    What was the point of asking what tyre size you should be getting then just go try something that no one recommended...
    |=TeamPOV=|=JDMYard=|=EK Squad=|=101 MotorCafe Performance Tuning=|

    EK Koni Yellows + King Spring Combo for Sale

  3. #39
    Member Array
    Join Date
    Jul 2009
    Location
    Melb
    Car:
    AP1,DC2R,NA6
    The profile is still high. 225/40s should be fine on a 9.

  4. #40
    Member Array
    Join Date
    Jun 2010
    Location
    Sydney
    Car:
    Honda S2000
    Quote Originally Posted by barefootbonzai View Post
    Well here's your problem.... 215/50 ain't gonna work cause the tyre size is way off. You need 215/45 or 225/45 or 235/40 or 245/40 either of them combinations should work. NOT 215/50

    What was the point of asking what tyre size you should be getting then just go try something that no one recommended...
    I needed a car for work. I needed to get tyres on. I found these for cheap so the plan is to test them really. Didnt think 12mm would make much of a difference on the wall.

  5. #41
    Member Array
    Join Date
    Jun 2010
    Location
    Sydney
    Car:
    Honda S2000
    Quote Originally Posted by jooboo View Post
    This made me LOL!

    ...pretty sure he wasnt joking...
    I dont get it though.

    For the front:
    Offsets lower than +43 are not recommended on the front because a very narrow tire would need to be used to avoid rubbing.
    +43 to +47 offset: 205 tires, 6.5" - 7.5" wide wheel
    +48 to +52 offset: 215 tires, 7.0" - 8.0" wide wheel
    +53 to +57 offset: 225 tires, 7.0" - 8.0" wide wheel
    +58 to +62 offset: 235 tires, 7.5" - 8.5" wide wheel
    +63 or higher offset: 245 tires, 7.5" - 8.5" wide wheel

    For the rear:
    Offsets below 40 are not recommended for the rear because a tire narrower than the stock tire would need to be used to avoid rubbing.
    +40 to +44 offset: 235 tires, 7.5" - 8.5" wide wheel
    +45 to +49 offset: 245 tires, 7.5" - 9.0" wide wheel
    +50 to +54 offset: 255 tires, 8.0" - 9.5" wide wheel
    +55 to +59 offset: 265 tires, 8.5" - 9.5" wide wheel
    +60 to +64 offset: 275 tires, 9.0" - 10.0" wide wheel
    +65 or higher offset: 285 tires, 9.0" - 10.0" wide wheel

    Thats been going around for years. From looking at that, you wouldnt think a 9'' +22 with 235 tyres would fit at the front?

  6. #42
    Member Array
    Join Date
    Sep 2004
    Location
    101 MotorCafe Performance/Tuning
    Car:
    01POV
    buddy there's no helping you... just put stock wheels back on.
    |=TeamPOV=|=JDMYard=|=EK Squad=|=101 MotorCafe Performance Tuning=|

    EK Koni Yellows + King Spring Combo for Sale

  7. #43
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    im thinking the compressed springs arent helping either


  8. #44
    pass the wheels over to me

  9. #45
    Member Array
    Join Date
    Aug 2005
    Location
    west smeobourne
    Car:
    AP1 S13
    compressed springs will probably even rub at stock height haha.
    take a pic of the guard roll and let us see how flat it is.
    FYS

    My fake shit rocks!
    Winton 1:35.4
    Wakefield 1:07.87

  10. #46
    Member Array
    Join Date
    Oct 2005
    Location
    Brisbane
    Car:
    ap1.5
    Guards were never the problem for me...the rear bumper was though..

  11. #47
    Member Array
    Join Date
    Aug 2005
    Location
    west smeobourne
    Car:
    AP1 S13
    Quote Originally Posted by jooboo View Post
    Guards were never the problem for me...the rear bumper was though..
    yea same lol. but his saying its rubbing the guard not the rear bumper so a pic will help us solve this issue, I would think a 215 on 9 +35 rim should clear even without a roll lmao
    FYS

    My fake shit rocks!
    Winton 1:35.4
    Wakefield 1:07.87

  12. #48
    Member Array
    Join Date
    Sep 2004
    Location
    101 MotorCafe Performance/Tuning
    Car:
    01POV
    this thread is an instant classic! NO WAY YOU CAN DO IT!
    |=TeamPOV=|=JDMYard=|=EK Squad=|=101 MotorCafe Performance Tuning=|

    EK Koni Yellows + King Spring Combo for Sale

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.