Page 2 of 2 FirstFirst 12
Results 13 to 24 of 24
  1. #13
    Member Array
    Join Date
    Oct 2008
    Car:
    07 Accord Euro Luxury 6MT
    Agree most likely cause is the tires, they may have swapped wheels around on the car intentionally or by accident, or knocked off a wheel weight, or not torqued some wheel nuts correctly.

    - HZ
    Last edited by HunterZero; 15-05-2012 at 03:16 PM.

  2. #14
    Quote Originally Posted by senna View Post
    Any violent shaking after the wheels have been off is enough to worry me...

    Have you checked the wheel nuts? Something you can do yourself to be safe, rather than keep driving on it until you can get back to the mechanic and have a go at them.
    +1 on this...

  3. #15
    Member Array
    Join Date
    Feb 2012
    Location
    Sydney, Australia
    Car:
    CL9
    Quote Originally Posted by senna View Post
    Any violent shaking after the wheels have been off is enough to worry me...

    Have you checked the wheel nuts? Something you can do yourself to be safe, rather than keep driving on it until you can get back to the mechanic and have a go at them.
    Just to check if the nuts have been tightened yeh?

    I will check that when I get home from work, Im not gona be easing the car much until I get a chance to take it back, maybe friday or sat morning

  4. #16
    Member Array
    Join Date
    Dec 2011
    Location
    Sydney
    Car:
    EK CIVIC
    Yes, just to check the wheel nuts are tightened properly.

    If you can, jack the car up at each corner and give the wheels a wobble just to double check, but start with going over the wheel nuts first.
    OHSC

  5. #17
    Member Array
    Join Date
    Feb 2012
    Location
    Melbourne
    Car:
    Accord Euro CL9
    Yeah, I would do that. Check the wheel nuts, but I would try loosening them, and tightening them up myself again, just to be safe. Should be that you just lose some wheel weights, although most wheels should be made well enough that loosing 10g wouldn't make that much of a difference.

  6. #18
    Member Array
    Join Date
    Feb 2012
    Location
    Sydney, Australia
    Car:
    CL9

    Question

    Thank you all for the quick replies.
    As many of u suggested, it was the wheel nuts!!
    The w@nkers forgot to tighten the wheel nuts on the front wheel on the drivers side!
    I tightened them and went over the remaining nuts and then took it for a spin, all seems back to normal!
    So much for being a reputable honda mechanic!

  7. #19
    Member Array
    Join Date
    Aug 2008
    Location
    Sydney
    Car:
    Honda Jazz R
    Quote Originally Posted by daKIK View Post
    Thank you all for the quick replies.
    As many of u suggested, it was the wheel nuts!!
    The w@nkers forgot to tighten the wheel nuts on the front wheel on the drivers side!
    I tightened them and went over the remaining nuts and then took it for a spin, all seems back to normal!
    So much for being a reputable honda mechanic!
    Which mechanic?
    ALLIGATORS GOT A GATE

  8. #20
    Member Array
    Join Date
    Mar 2012
    Location
    Sydney
    Car:
    07 Accord Euro
    That is seriously unacceptable. They pretty much put your life at risk.

  9. #21
    Member Array
    Join Date
    Feb 2012
    Location
    Sydney, Australia
    Car:
    CL9
    Quote Originally Posted by EG52NV View Post
    Which mechanic?
    Hanny's Performance

    Quote Originally Posted by Nuggety Nugget View Post
    That is seriously unacceptable. They pretty much put your life at risk.
    Yeh I know man, could of been a lot worse!

  10. #22
    Member Array
    Join Date
    Dec 2011
    Location
    Sydney
    Car:
    EK CIVIC
    Wow, very unlike Hannys to be careless like that...

    Have you had a chat to them about it? I would still go back and let them know and see what their response is
    OHSC

  11. #23
    Member Array
    Join Date
    Mar 2012
    Location
    Sydney
    Car:
    07 Accord Euro
    Quote Originally Posted by daKIK View Post
    Hanny's Performance
    Shit! Did you watch them perform the service?

  12. #24
    Member Array
    Join Date
    Feb 2012
    Location
    Sydney, Australia
    Car:
    CL9
    Quote Originally Posted by senna View Post
    Wow, very unlike Hannys to be careless like that...

    Have you had a chat to them about it? I would still go back and let them know and see what their response is
    I dont see the point to be honest! Im expecting the guy there to be rude and arrogant about it like he was during the service anyway.. Id rather not waste my time and go back for nothing

    Quote Originally Posted by Nuggety Nugget View Post
    Shit! Did you watch them perform the service?
    Yeh I did watch them from a distance, but I might of looked away or was chatting with my brother at times.. so I dont recall seeing them tightening the nuts at the end

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.